Package: aeryn-dev Source: aeryn Version: 1.0-1 Architecture: i386 Maintainer: Matthias Urlichs Installed-Size: 920 Priority: extra Section: libdevel Filename: pool/main/a/aeryn/aeryn-dev_1.0-1_i386.deb Size: 151682 SHA256: 11551f8bd9d087eadac17a1f4cfe81ffc7aeefbf9820a7007a4be75a6086af73 SHA1: 1f7f8eddf2dd30bad20f96a909d24021c7847d11 MD5sum: a2c5544ab10c9660df6fe522dafc42ec Description: Aeryn development files Aeryn files for development, incl static library Package: asterisk Version: 42:10~smurf1 Architecture: i386 Maintainer: Debian VoIP Team Installed-Size: 8396 Depends: libasound2 (>> 1.0.22), libc6 (>= 2.8), libcap2 (>= 2.10), libcurl3 (>= 7.16.2-1), libexpat1 (>= 1.95.8), libgcc1 (>= 1:4.1.1), libgsm1 (>= 1.0.13), libiksemel3, libldap-2.4-2 (>= 2.4.7), libncurses5 (>= 5.7+20100313), libogg0 (>= 1.0rc3), libopenh323-1.18.0 (>= 1.18.0~) | libopenh323-1.18.0-develop (>= 1.18.0~), libpq5 (>= 8.4~0cvs20090328), libpri1.4 (>= 1.4.11), libpt-1.10.10 (>= 1.10.10-3ubuntu1~), libradiusclient-ng2, libsasl2-2, libsdl1.2debian (>= 1.2.10-1), libsnmp15 (>= 5.4.3~dfsg), libspeex1 (>= 1.2~beta3-1), libspeexdsp1 (>= 1.2~beta3.2-1), libsqlite0 (>= 2.8.17), libsqlite3-0 (>= 3.7.2), libssl0.9.8 (>= 0.9.8m-1), libstdc++6 (>= 4.1.1), libsybdb5 (>= 0.63), libtonezone2.0, libvorbis0a (>= 1.1.2), libvorbisenc2 (>= 1.1.2), libx11-6, libxml2 (>= 2.7.4), unixodbc (>= 2.2.11), zlib1g (>= 1:1.1.4), asterisk-config (= 42:10~smurf1) | asterisk-config-custom, adduser, asterisk-sounds-main Suggests: ekiga, ohphone, twinkle, kphone, asterisk-doc, asterisk-dev, asterisk-h323 Conflicts: asterisk-bristuff, asterisk-chan-capi (<< 1.1.1-1~), asterisk-classic Replaces: asterisk-bristuff, asterisk-classic Provides: asterisk-1.4 Homepage: http://www.asterisk.org/ Priority: optional Section: comm Filename: pool/main/a/asterisk/asterisk_10~smurf1_i386.deb Size: 3053564 SHA256: 1c0b579b971e3920d8f11df4a231e263c72c616ab98d9f25b194021fa94603f1 SHA1: 26713ef2fa5ead9bf5fc0c2f2dbc8cecca0fa7fc MD5sum: db21800c2823af0f8c16678bad7df3b3 Description: Open Source Private Branch Exchange (PBX) Asterisk is an Open Source PBX and telephony toolkit. It is, in a sense, middleware between Internet and telephony channels on the bottom, and Internet and telephony applications at the top. . Asterisk can be used with Voice over IP (SIP, H.323, IAX and more) standards, or the Public Switched Telephone Network (PSTN) through supported hardware. . Supported hardware: . * All Wildcard (tm) ISDN PRI cards from Digium (http://www.digium.com) * HFC-S/HFC-4S-based ISDN BRI cards (Junghanns.NET, beroNet, Digium etc.) * All TDM (FXO/FXS) cards from Digium * Various clones of Digium cards such as those by OpenVox * Xorcom Astribank USB telephony adapter (http://www.xorcom.com) * Voicetronix OpenPCI, OpenLine and OpenSwitch cards * CAPI-compatible ISDN cards (using the add-on package chan-capi) * Full Duplex Sound Card (ALSA or OSS) supported by Linux * Tormenta T1/E1 card (http://www.zapatatelephony.org) * QuickNet Internet PhoneJack and LineJack (http://www.quicknet.net) . This is the main package that includes the Asterisk daemon and most channel drivers and applications. Package: asterisk-config Source: asterisk Version: 42:10~smurf1 Architecture: all Maintainer: Debian VoIP Team Installed-Size: 1408 Recommends: asterisk Conflicts: asterisk-config-custom Homepage: http://www.asterisk.org/ Priority: optional Section: comm Filename: pool/main/a/asterisk/asterisk-config_10~smurf1_all.deb Size: 437294 SHA256: d5afe1b6a864c161a55b5aa053f1242b3149e9ae5df12efacbffbe469df3d641 SHA1: d47de1845a2667ee224d0e734a9865b33aa177f0 MD5sum: 13f4bb7df9bd326af41de3d30dcb10df Description: Configuration files for Asterisk Asterisk is an Open Source PBX and telephony toolkit. . This package contains the default configuration files of Asterisk. Package: asterisk-dbg Source: asterisk Version: 42:10~smurf1 Architecture: i386 Maintainer: Debian VoIP Team Installed-Size: 69804 Depends: asterisk (= 42:10~smurf1) Homepage: http://www.asterisk.org/ Priority: extra Section: devel Filename: pool/main/a/asterisk/asterisk-dbg_10~smurf1_i386.deb Size: 23135560 SHA256: 96adcce4d5a77dc760ad13cbea2d5dfacf0761481e1a6dc65c9af1542e72f90a SHA1: be7c66e71a7ddc8a50d237a7aa2c19341ee03d4c MD5sum: 645a77a3d587186170eb94568507a3fa Description: Debugging symbols for Asterisk Asterisk is an Open Source PBX and telephony toolkit. . This package includes the debugging symbols useful for debugging Asterisk. The debugging symbols are used for execution tracing and core dump analysis. Package: asterisk-dev Source: asterisk Version: 42:10~smurf1 Architecture: all Maintainer: Debian VoIP Team Installed-Size: 1788 Recommends: asterisk Replaces: asterisk (<< 1:1.4.21.1~dfsg-1) Homepage: http://www.asterisk.org/ Priority: extra Section: devel Filename: pool/main/a/asterisk/asterisk-dev_10~smurf1_all.deb Size: 384636 SHA256: 8be7eb3fd8fb382a78feb7e1d36592572622783297f1b0db80f12b53e2ab2b5a SHA1: af5d725e1a393ceb8b88b1cd800f58ef02f4ec80 MD5sum: 528e902d8cc9b354f444cc971fa5aa2a Description: Development files for Asterisk Asterisk is an Open Source PBX and telephony toolkit. . This package contains the include files used if you wish to compile a package which requires Asterisk's source file headers. Package: asterisk-doc Source: asterisk Version: 42:10~smurf1 Architecture: all Maintainer: Debian VoIP Team Installed-Size: 455540 Recommends: asterisk Homepage: http://www.asterisk.org/ Priority: extra Section: doc Filename: pool/main/a/asterisk/asterisk-doc_10~smurf1_all.deb Size: 270430286 SHA256: 00af8e0a3a9a6a9f2417bf23f988f4110e651c8ccfc6fb79c11998db2b9e8b30 SHA1: ffc8ebe6330e2e6feb9673871adb270298aa410c MD5sum: 72238763f647ac5241a8d4969aa77f10 Description: Source code documentation for Asterisk Asterisk is an Open Source PBX and telephony toolkit. . This package contains the source code documentation needed if you wish to extend Asterisk by writing loadable modules for it. Package: asterisk-h323 Source: asterisk Version: 42:10~smurf1 Architecture: i386 Maintainer: Debian VoIP Team Installed-Size: 468 Depends: asterisk-1.4, libc6 (>= 2.4), libgcc1 (>= 1:4.1.1), libstdc++6 (>= 4.4.0) Homepage: http://www.asterisk.org/ Priority: optional Section: comm Filename: pool/main/a/asterisk/asterisk-h323_10~smurf1_i386.deb Size: 178464 SHA256: 1e0542151a5dbb6daace11903d6835e23803e3f5d216c5e0d9b8237f3414620e SHA1: 0babba1ae3767f13b14dfed2e35467efefa774fe MD5sum: e4370adce3861d8f053fd6621e5cd0d5 Description: H.323 protocol support for Asterisk Asterisk is an Open Source PBX and telephony toolkit. . This channel driver (chan_h323) provides support for the H.323 protocol for Asterisk. This is an implementation originally contributed by NuFone and nowdays maintained and distributed by Digium, Inc. Hence, it is considered the official H.323 chanel driver. . This is one of many H.323 channel implementations for Asterisk with others being chan_oh323 and chan_ooh323c, distributed by Debian as asterisk-oh323 and asterisk-ooh323c, respectively. . For more information about the Asterisk PBX, have a look at the Asterisk package. Package: asterisk-lcr Source: lcr Version: 1.2-1 Architecture: i386 Maintainer: Matthias Urlichs Installed-Size: 124 Depends: libc6 (>= 2.4), asterisk, lcr Homepage: http://linux-call-router.de Priority: extra Section: comm Filename: pool/main/l/lcr/asterisk-lcr_1.2-1_i386.deb Size: 25864 SHA256: 9ffb00ec8b7c1df6a4f73d403dc2325bd3212ef2f02102c3b9fbb2fae1c2728f SHA1: edf0728ec7f1a9cdffe58ab64e38e51faf937cc1 MD5sum: 7aff5c875ce893d1d0e1679f224e959e Description: Linux Call Router channel for Asterisk This channel connects Asterisk to the Linux Call Router. Package: asterisk-sounds-main Source: asterisk Version: 42:10~smurf1 Architecture: all Maintainer: Debian VoIP Team Installed-Size: 3000 Recommends: asterisk Replaces: asterisk-sounds-extra Homepage: http://www.asterisk.org/ Priority: optional Section: comm Filename: pool/main/a/asterisk/asterisk-sounds-main_10~smurf1_all.deb Size: 1832680 SHA256: 058a0852bcfc793739a56fdf34aac179b36f0cead547f71412e81297e045c30e SHA1: 553533cb525bd2b30584c71322edb7bfef309c55 MD5sum: df6dbac7f320af24b4230ff6ce1f6cb8 Description: Core Sound files for Asterisk (English) Asterisk is an Open Source PBX and telephony toolkit. . This package contains the default (core) sound files in English, useful for the operation of Asterisk. Package: cdparanoia Version: 3.10.2+debian-1 Architecture: i386 Maintainer: Daniel Baumann Installed-Size: 196 Depends: libc6 (>= 2.4), libcdparanoia0 Homepage: http://www.xiph.org/paranoia/ Priority: optional Section: sound Filename: pool/main/c/cdparanoia/cdparanoia_3.10.2+debian-1_i386.deb Size: 66354 SHA256: eeab01e21d52dc51bae89dc29ec3b2ed9959f73838d03c42e1050322b94b6a56 SHA1: fda2cc5e20b2f217ba3b12ec0177b76bae9893c1 MD5sum: 71eb270917da817cf0c60816d52ed67c Description: audio extraction tool for sampling CDs Unlike similar programs such as cdda2wav, cdparanoia goes to great lengths to try to extract the audio information without any artifacts such as jitter. Package: cplat-debug-dev Source: cplat Version: 2.0-2 Architecture: i386 Maintainer: Matthias Urlichs Installed-Size: 4844 Depends: cplat-dev (= 2.0-2) Replaces: cplat-dev Priority: extra Section: libdevel Filename: pool/main/c/cplat/cplat-debug-dev_2.0-2_i386.deb Size: 1116152 SHA256: fd0f74fe2ebe3d571b44024cd91f74a6addf2873a3058280ca7573895e658af7 SHA1: 52724b0341a1e409279f4d26199dbfbdd2d9aa62 MD5sum: f78415d56990ce64c8d3cee17dee4efe Description: CPLAT core, debug development CPLAT core development, debugging version. Package: cplat-dev Source: cplat Version: 2.0-2 Architecture: i386 Maintainer: Matthias Urlichs Installed-Size: 9224 Priority: extra Section: libdevel Filename: pool/main/c/cplat/cplat-dev_2.0-2_i386.deb Size: 1712884 SHA256: 02022c2371784b01bac876ea25d59aae835e1d00a5657e2bddb1bc1b74e5512b SHA1: eef1a6e7219f15ad56a790d6e07b2990ce103941 MD5sum: 4f3e43fc7a963f16f026606c704e1ab0 Description: CPLAT core, development CPLAT core development. Package: cplat-test Source: cplat Version: 2.0-2 Architecture: i386 Maintainer: Matthias Urlichs Installed-Size: 1436 Priority: extra Section: libdevel Filename: pool/main/c/cplat/cplat-test_2.0-2_i386.deb Size: 539776 SHA256: dd226ab5345d5c3c45ec8dd0a6416d4064604ee4cb266ebc8faabef6bc84b4cf SHA1: bd78dd77b478f49624154993d8e5ab46981ce515 MD5sum: 89f7fd0a004631170d63977bc92189f2 Description: CPLAT test program CPLAT test program Package: cpuminer Version: 1.0.1-1 Architecture: i386 Maintainer: Matthias Urlichs Installed-Size: 168 Depends: libc6 (>= 2.4), libcurl3-gnutls (>= 7.16.2-1) Homepage: http://www.bitcoin.org/smf/index.php?topic=1925.0;all Priority: extra Section: finance Filename: pool/main/c/cpuminer/cpuminer_1.0.1-1_i386.deb Size: 54714 SHA256: a7543e2e97c46085af90aa843e2611ef75010a9e3cd61e4aa1455e51e25b2c0a SHA1: f77d11f2e0a79179ee75a29a03207d008ba9d258 MD5sum: ab37b0ca69c5160c6af803af819b47c2 Description: mine bitcoins via CPU mine coins! Package: fast-export Version: 1 Architecture: i386 Maintainer: Matthias Urlichs Installed-Size: 80 Depends: python (>= 2.4) Homepage: git://repo.or.cz/fast-export.git Priority: extra Section: devel Filename: pool/main/f/fast-export/fast-export_1_i386.deb Size: 10260 SHA256: 653a6095002e098aab93e2f7f43feac9ae234794ca620dcf74f5893c5b99fa85 SHA1: 8213312a0681223867861c9c24a7f58b196a55e9 MD5sum: c79882ac855471c5854d52b6402a5731 Description: fast incremental HG to GIT exporter This is a fast incremental HG to GIT exporter. . This program does not yet handle updating HG tags. Package: fhem Version: 4.4+cvs20081013 Architecture: all Maintainer: Matthias Urlichs Installed-Size: 932 Depends: perl (>= 5.8), adduser Homepage: http://www.koeniglich.de/fhem/fhem.html Priority: extra Section: admin Filename: pool/main/f/fhem/fhem_4.4+cvs20081013_all.deb Size: 429734 SHA256: 7ae1bf03ac95d6256a63d2a8fb91b61c81a8dca04a1c43f5dc6fd5f28c287fed SHA1: ad635b3fec2542a8a66c159ffa113a3a28e239ee MD5sum: 240438955e996c1bbf2ddc48e2b91d95 Description: Server to access FS20 and similar systems This server can control 868.35 MHz control modules as sold by ELV, Conrad, etc. in Germany. Package: fuseowfs Source: owfs Version: 2.7p29-1 Architecture: i386 Maintainer: Matthias Urlichs Installed-Size: 56 Depends: libc6 (>= 2.4), libfuse2 (>= 2.6), libowfs27, libusb-0.1-4 (>= 2:0.1.12) Priority: extra Section: misc Filename: pool/main/o/owfs/fuseowfs_2.7p29-1_i386.deb Size: 17192 SHA256: 0daf69c89dbee18e5f66e188b45ec9a8612b570b91ffac7fe9e0bf549ed15e19 SHA1: 0df08130d4727b291eaea421a53abb38fb4b4dfa MD5sum: d964f334ce5d4242cd3717c5d9a83229 Description: Dallas 1-wire support: FUSE daemon The 1-Wire bus is a cheap low-speed bus for devices like weather sensors, access control, etc. It can be attached to your system via serial, USB, I2C, and other interfaces. . This package contains the FUSE daemon. Package: gnucash-common Source: gnucash Version: 2.3.12+cvs-1 Architecture: all Maintainer: Thomas Bushnell, BSG Installed-Size: 25448 Recommends: gnucash (>= 2.3.12+cvs-1) Conflicts: gnucash (<< 2.3.12+cvs-1) Replaces: gnucash (<< 1.8.8-5) Homepage: http://www.gnucash.org/ Priority: optional Section: gnome Filename: pool/main/g/gnucash/gnucash-common_2.3.12+cvs-1_all.deb Size: 5959734 SHA256: 4244005a0e09cec6492637bd6728f3f82d861a01ce4cef8328bec59ad2a70d0a SHA1: b7a57eeec8816ea4f71b7c191bd04b0a2263fc73 MD5sum: 520fc30f30b2b3f215cce3feaf44be93 Description: A personal finance and money tracking program Gnucash can track finances in multiple accounts, keeping running and reconciled balances. It has an X based graphical user interface, double entry, a hierarchy of accounts, expense accounts (categories), and can import Quicken QIF files and OFX files, and interact with HBCI banks. . This package contains the architecture independent portions of gnucash. Package: homevent Version: 0.2.8 Architecture: i386 Maintainer: Matthias Urlichs Installed-Size: 680 Depends: libc6 (>= 2.7-1), libglib2.0-0 (>= 2.15.0), libportaudio2, python2.5, python (>= 2.5), python (<< 2.6), python-support (>= 0.2), python-twisted-core, python-twisted-conch Recommends: pulseaudio (>= 0.9.7) Priority: extra Section: python Filename: pool/main/h/homevent/homevent_0.2.8_i386.deb Size: 149916 SHA256: d1a706308baa26a6dbf382abc99e4b9c272e6b05b996452b3770f0cb9f5a54a2 SHA1: 876d92ddd1a9b4467a8e063b6d5e81ce371b942a MD5sum: 4e68fc50aa9ac754a23cf552d8bb8b53 Description: A scripted event-based monitoring and control system HomEvenT is a flexible, scripted, network-aware event handler. It can monitor and control quite a few external buses and peripherals, including 1wire and FS20. It can write values to RRD files and allows access to its command interpreter with SSH. . The author uses it as a central hub for home automation. Package: kernel-headers-2.6.27-rc2-1.34 Source: kernel-smurf Version: 1.34 Architecture: i386 Maintainer: Matthias Urlichs Installed-Size: 21616 Recommends: module-assistant Conflicts: kernel-smurf-src-2.6.27-rc2-1.34 Replaces: kernel-smurf-src-2.6.27-rc2-1.34 Priority: extra Section: base Filename: pool/main/k/kernel-smurf/kernel-headers-2.6.27-rc2-1.34_1.34_i386.deb Size: 3510232 SHA256: 020664b018e10df729c94da2a702f21c834b22c7e5666e03a69424705ecf9847 SHA1: 018483035d120a9e7f582f63567444838b824fc3 MD5sum: e72e6d84d4978ed7de9539a88e7f86c2 Description: Linux kernel source build, built by smurf, version 2.6.27-rc2-1.34 This is my personal kernel build system. Unlike the standard Debian kernel package, it will build a modularized kernel directly from the Kernel BitKeeper archive. . A git archive of the debian/ subtree is available from http://netz.smurf.noris.de/git/kernel_smurf.git/ . This package is necessary if you want to build modules off this kernel with module-assistant. Package: kernel-smurf-2.6.25-1.33 Source: kernel-smurf Version: 1.33 Architecture: i386 Maintainer: Matthias Urlichs Installed-Size: 1640 Depends: coreutils | fileutils (>= 4.0) Recommends: kernel-smurf-mod-2.6.25-1.33, lilo | grub | yaboot Priority: extra Section: base Filename: pool/main/k/kernel-smurf/kernel-smurf-2.6.25-1.33_1.33_i386.deb Size: 1612416 SHA256: dffb2185bd2440cb2e21f9cb1a85b6f208c5eb23e93bac04f73115ecf85a765c SHA1: a6e81655d35a725d9544d1b6a831b47318c95413 MD5sum: 12cd1edaade76802dedc9980bc54a78b Description: Linux kernel object, built by smurf, version 2.6.25-1.33 This is my personal kernel build system. Unlike the standard Debian kernel package, it will build a modularized kernel directly from the Kernel BitKeeper archive. . A git archive of the debian/ subtree is available from http://netz.smurf.noris.de/http://netz.smurf.noris.de/git/kernel_smurf.git/ . This kernel package's install script directly builds an initial RAM file system and installs the new kernel into lilo, grub and/or yaboot. Patches for other boot loaders are appreciated. Package: kernel-smurf-2.6.27-rc2-1.34 Source: kernel-smurf Version: 1.34 Architecture: i386 Maintainer: Matthias Urlichs Installed-Size: 1784 Depends: coreutils | fileutils (>= 4.0) Recommends: lilo | grub | yaboot, kernel-smurf-mod-2.6.27-rc2-1.34 Priority: extra Section: base Filename: pool/main/k/kernel-smurf/kernel-smurf-2.6.27-rc2-1.34_1.34_i386.deb Size: 1758514 SHA256: f603459468bfe49381edc847118cd751f2529be561403fac52601eb930f5a72d SHA1: e58f37da0c4ad13a9c6e98613c3dea196a213b94 MD5sum: 0298d48c418ce2ec0f1440577730b9ee Description: Linux kernel object, built by smurf, version 2.6.27-rc2-1.34 This is my personal kernel build system. Unlike the standard Debian kernel package, it will build a modularized kernel directly from the Kernel BitKeeper archive. . A git archive of the debian/ subtree is available from http://netz.smurf.noris.de/http://netz.smurf.noris.de/git/kernel_smurf.git/ . This kernel package's install script directly builds an initial RAM file system and installs the new kernel into lilo, grub and/or yaboot. Patches for other boot loaders are appreciated. Package: kernel-smurf-mod-2.6.25-1.33 Source: kernel-smurf Version: 1.33 Architecture: i386 Maintainer: Matthias Urlichs Installed-Size: 43492 Depends: coreutils | fileutils (>= 4.0), initramfs-tools, module-init-tools Recommends: kernel-smurf-2.6.25-1.33 Priority: extra Section: base Filename: pool/main/k/kernel-smurf/kernel-smurf-mod-2.6.25-1.33_1.33_i386.deb Size: 14071354 SHA256: 18b04c767c36ec773c49618ea174c9d4c8d800ef29a4fcd6bf440f59cf388520 SHA1: a077f1cbc45203e93becd794a5b4f848eac835f7 MD5sum: f12f070e6fbc0a9d8efd14ae2f58bb77 Description: Linux kernel modules, built by smurf, version 2.6.25-1.33 This is my personal kernel build system. Unlike the standard Debian kernel package, it will build a modularized kernel directly from the Kernel BitKeeper archive. . A git archive of the debian/ subtree is available from http://netz.smurf.noris.de/http://netz.smurf.noris.de/git/kernel_smurf.git/ . This package contains the kernel modules. Package: kernel-smurf-mod-2.6.27-rc2-1.34 Source: kernel-smurf Version: 1.34 Architecture: i386 Maintainer: Matthias Urlichs Installed-Size: 44288 Depends: coreutils | fileutils (>= 4.0), initramfs-tools, module-init-tools Recommends: kernel-smurf-2.6.27-rc2-1.34 Priority: extra Section: base Filename: pool/main/k/kernel-smurf/kernel-smurf-mod-2.6.27-rc2-1.34_1.34_i386.deb Size: 14658744 SHA256: 1426282069185ce6d12a672bccddd807cffc0dcc4f291ba883227f091f4dd9e3 SHA1: 9363bee6b8b4634bcfe40628a4ef065865ca98e9 MD5sum: dc1b509ccf165ec0bd1cb24260ab3eac Description: Linux kernel modules, built by smurf, version 2.6.27-rc2-1.34 This is my personal kernel build system. Unlike the standard Debian kernel package, it will build a modularized kernel directly from the Kernel BitKeeper archive. . A git archive of the debian/ subtree is available from http://netz.smurf.noris.de/http://netz.smurf.noris.de/git/kernel_smurf.git/ . This package contains the kernel modules. Package: kernel-smurf-src-2.6.25-1.33 Source: kernel-smurf Version: 1.33 Architecture: i386 Maintainer: Matthias Urlichs Installed-Size: 20784 Recommends: module-assistant Priority: extra Section: base Filename: pool/main/k/kernel-smurf/kernel-smurf-src-2.6.25-1.33_1.33_i386.deb Size: 3428990 SHA256: 12a0e28abe5799ff6491a03f49ebdae5f8e2d7ef1fcb160f8bdf4b9d6e60c23c SHA1: e72447f79b5ffedfb48d760f9db95a00b8a00954 MD5sum: 60c72d1f6c665c056a7c8e249ad9f785 Description: Linux kernel source build, built by smurf, version 2.6.25-1.33 This is my personal kernel build system. Unlike the standard Debian kernel package, it will build a modularized kernel directly from the Kernel BitKeeper archive. . A git archive of the debian/ subtree is available from http://netz.smurf.noris.de/http://netz.smurf.noris.de/git/kernel_smurf.git/ . This package is necessary if you want to build modules off this kernel with module-assistant. Package: kicad Version: 0.0.20071129-3 Architecture: i386 Maintainer: Debian Kicad Team Installed-Size: 6548 Depends: kicad-common (>= 0.0.20071129-3), libc6 (>= 2.6-1), libgcc1 (>= 1:4.2.1), libgl1-mesa-glx | libgl1, libglu1-mesa | libglu1, libstdc++6 (>= 4.2.1), libwxbase2.8-0 (>= 2.8.4.0), libwxgtk2.8-0 (>= 2.8.4.0) Priority: optional Section: electronics Filename: pool/main/k/kicad/kicad_0.0.20071129-3_i386.deb Size: 2429418 SHA256: 7b2e312174950b6076de95edccd73ddeea812cd646c912a3ff20d5fc80143338 SHA1: e1f8c1523a93538a0ae32917319de0db626a9f8c MD5sum: 7ab76628306b123734fc800414a3be9f Description: Electronic schematic and PCB design software Kicad is a suite of programs for the creation of printed circuit boards. It includes a schematic editor, a PCB layout tool, support tools and a 3D viewer to display a finished & fully populated PCB. . Kicad is made up of 5 main components: . * kicad - project manager * eeschema - schematic editor * pcbnew - PCB editor * gerbview - GERBER viewer * cvpcb - footprint selector for components . Libraries: * Both eeschema and pcbnew have library managers and editors for their components and footprints * You can easily create, edit, delete and exchange library items * Documentation files can be associated with components, footprints and key words, allowing a fast search by function * Very large libraries are available for schematic components and footprints * Most components have corresponding 3D models . Homepage: http://www.lis.inpg.fr/realise_au_lis/kicad/ Package: kicad-common Source: kicad Version: 0.0.20071129-3 Architecture: all Maintainer: Debian Kicad Team Installed-Size: 17516 Recommends: kicad Priority: optional Section: electronics Filename: pool/main/k/kicad/kicad-common_0.0.20071129-3_all.deb Size: 3474164 SHA256: 18ac7b6328635db851c00f3608079338aa86f6f5301eb877d72205dcbabb4877 SHA1: 0269b540638eb137fed5cb9dd6559ed04d8d0cbc MD5sum: f453893912e77fca4054c07a95193208 Description: Common files used by kicad This package contains the component libraries and language files for Kicad. Package: kicad-doc-de Source: kicad Version: 0.0.20071129-3 Architecture: all Maintainer: Debian Kicad Team Installed-Size: 344 Depends: kicad-doc-en (= 0.0.20071129-3) Priority: optional Section: electronics Filename: pool/main/k/kicad/kicad-doc-de_0.0.20071129-3_all.deb Size: 269952 SHA256: 6bfc9c09a3abb8689c59e2c1a58e09e30591aed26c5995da119d28ef1ce5d4cd SHA1: 28053ab20cf575962eb2b9ae0cd41b726890de6c MD5sum: eee0358222ab5e45de3a23f25480cfd5 Description: Kicad help files (German) This package provides documentation for Kicad in German. This package does not provide a German translation of the manual so English will be used instead. Package: kicad-doc-en Source: kicad Version: 0.0.20071129-3 Architecture: all Maintainer: Debian Kicad Team Installed-Size: 5248 Priority: optional Section: electronics Filename: pool/main/k/kicad/kicad-doc-en_0.0.20071129-3_all.deb Size: 4877612 SHA256: fab2eefd7038b1f935a40858c0b7b37ca2dbb765a449699c0a6fcaef0fde5320 SHA1: 7eb42d7af6097a8bc06ced500b9e664d56493baf MD5sum: 6f4a93ee72694cf2bdd76fb39033ffaa Description: Kicad help files (English) This package provides documentation for Kicad in English. Package: kicad-doc-es Source: kicad Version: 0.0.20071129-3 Architecture: all Maintainer: Debian Kicad Team Installed-Size: 4776 Priority: optional Section: electronics Filename: pool/main/k/kicad/kicad-doc-es_0.0.20071129-3_all.deb Size: 4412212 SHA256: ed7914af37ba753a0dc186add63b6c25401080048559c2057d82f59ed5f1ceb7 SHA1: 654df76d0016f66130c1a2aabb1a3351ca8453bb MD5sum: ba8d28aca848773ac78a9012186d7224 Description: Kicad help files (Spanish) This package provides documentation for Kicad in Spanish. Package: kicad-doc-fr Source: kicad Version: 0.0.20071129-3 Architecture: all Maintainer: Debian Kicad Team Installed-Size: 6956 Priority: optional Section: electronics Filename: pool/main/k/kicad/kicad-doc-fr_0.0.20071129-3_all.deb Size: 6526812 SHA256: 2b6a62d12849c9c2e76c1e20953d3213ac0c4f979cbbbe0d2a02f7eee840626c SHA1: d6113a627accd1b7fb4cce71b9b4749944b2c9ca MD5sum: c26a9dddbd88f66f7aff76c769a2db35 Description: Kicad help files (French) This package provides documentation for Kicad in French. Package: kicad-doc-it Source: kicad Version: 0.0.20071129-3 Architecture: all Maintainer: Debian Kicad Team Installed-Size: 368 Depends: kicad-doc-en (= 0.0.20071129-3) Priority: optional Section: electronics Filename: pool/main/k/kicad/kicad-doc-it_0.0.20071129-3_all.deb Size: 300596 SHA256: db85c1ec7b9786d0b2c14ad3d575547aa13620bee6f4bce35457cd7f1d4bf1dd SHA1: 6c8deff36c112959551d21263ec4719f1ed6dd9e MD5sum: ef38bc6a942c5fb4668c761caf58da30 Description: Kicad help files (Italian) This package provides documentation for Kicad in Italian. This package does not provide an Italian translation of the manual so English will be used instead. Package: kicad-doc-pt Source: kicad Version: 0.0.20071129-3 Architecture: all Maintainer: Debian Kicad Team Installed-Size: 5500 Priority: optional Section: electronics Filename: pool/main/k/kicad/kicad-doc-pt_0.0.20071129-3_all.deb Size: 5026162 SHA256: bded5681f10abae571d1181b87581075da476b4f42de51fb52cdaac7947b3154 SHA1: 8d135817e8d90c04872523c3890b01bb4077e79d MD5sum: 25ec2febbcc91b1b4ca97d9ece1575cc Description: Kicad help files (Portuguese) This package provides documentation for Kicad in Portuguese. Package: kicad-doc-ru Source: kicad Version: 0.0.20071129-3 Architecture: all Maintainer: Debian Kicad Team Installed-Size: 2892 Priority: optional Section: electronics Filename: pool/main/k/kicad/kicad-doc-ru_0.0.20071129-3_all.deb Size: 2503778 SHA256: ac593f2f528e44f906814ce3007539f2fac7f34bc7572e8b988d5965b246e76b SHA1: a4802bec5a3f10fc2f579bf6efb0977d7f8bf1b7 MD5sum: e5749523a4ba9467bf682e2159cc944b Description: Kicad help files (Russian) This package provides documentation for Kicad in Russian. Package: lanrev-agent Source: cobra Version: 1-1 Architecture: i386 Maintainer: Matthias Urlichs Installed-Size: 5144 Depends: libatk1.0-0 (>= 1.20.0), libbonobo2-0 (>= 2.15.0), libc6 (>= 2.8), libcairo2 (>= 1.2.4), libdbus-glib-1-2 (>= 0.78), libexpat1 (>= 1.95.8), libfontconfig1 (>= 2.4.0), libfreetype6 (>= 2.2.1), libgcc1 (>= 1:4.1.1), libglib2.0-0 (>= 2.16.0), libgnome2-0 (>= 2.17.3), libgtk2.0-0 (>= 2.12.0), libltdl7 (>= 2.2.6a), libopencflite-pps, liborbit2 (>= 1:2.14.10), libpango1.0-0 (>= 1.14.0), libpopt0 (>= 1.14), libstdc++6 (>= 4.2.1), libx11-6, libxss1, zlib1g (>= 1:1.1.4) Homepage: http://poleposition-sw.com/ Priority: extra Section: admin Filename: pool/main/c/cobra/lanrev-agent_1-1_i386.deb Size: 2121816 SHA256: 340430d9240b28032f34051207278ef431461415c181cfc87272d1ac7b583ebf SHA1: 51832f75b0f897965faf35db014357918ae852f1 MD5sum: 2330b2245a73ca79e1d244631e68d4d7 Description: LANrev agent, production version LANrev agent Package: lanrev-agent-debug Source: cobra Version: 1-1 Architecture: all Maintainer: Matthias Urlichs Installed-Size: 34496 Homepage: http://poleposition-sw.com/ Priority: extra Section: admin Filename: pool/main/c/cobra/lanrev-agent-debug_1-1_all.deb Size: 11134938 SHA256: 0aa7fa7183444bc93c488f125960ce3e53b13ba592e1a287da5d507a333b9ce0 SHA1: 8bda0df7b4b5c4a35ee271d26e4ee172c2b3d87a MD5sum: 792bf939887c062cc6cbc4391af07c98 Description: LANrev agent, debugging version LANrev agent Package: lcr Version: 1.2-1 Architecture: i386 Maintainer: Matthias Urlichs Installed-Size: 9320 Depends: libc6 (>= 2.4), libgcc1 (>= 1:4.1.1), libncurses5 (>= 5.6+20071006-3), libssl0.9.8 (>= 0.9.8f-5), libstdc++6 (>= 4.1.1) Homepage: http://linux-call-router.de Priority: extra Section: comm Filename: pool/main/l/lcr/lcr_1.2-1_i386.deb Size: 4957666 SHA256: 92990601cb8bf6b463f4be50ae402a73aea145f2da609a503d8faa7b519c3adc SHA1: b904f10ede73d3bcde707857996dd9ad25082b1b MD5sum: fb7a80552f7d5d380808566cebfe0db4 Description: Linux Call Router (mISDN) This is a mISDN-based router for telephone calls. . Warning: PBX software can be connected to private hardware, as well as public switched networks. Due to wrong use or software bugs, it can cause failures to these networks and hardware, disturbing users of these networks and hardware, cause load and unwanted costs, and may prohibit making calls, especially in case of an emergency. . The authors of this software cannot take any responsibility for correct use and correct behaviour of this software. If you use this software, you aggree the terms of the LICENSE and README file. You will also inform your customers about the content of the LICENSE and README file. . Some countries and/or telephone networks require special approval in order to allow telephone devices to be connected to their networks. Package: libcdparanoia0 Source: cdparanoia Version: 3.10.2+debian-1 Architecture: i386 Maintainer: Daniel Baumann Installed-Size: 340 Depends: libc6 (>= 2.4) Homepage: http://www.xiph.org/paranoia/ Priority: optional Section: libs Filename: pool/main/c/cdparanoia/libcdparanoia0_3.10.2+debian-1_i386.deb Size: 127390 SHA256: 610fb80bbfaf9596b694412560a11b90cf244c6e9596bf99d6215cc0bb168aa4 SHA1: d4e7b7e11bc0f44699ff50a55cc7f290210ba632 MD5sum: 8f51bea380db320e35a3ce2a848221b2 Description: audio extraction tool for sampling CDs (library) An audio extraction tool for sampling CDs. Unlike similar programs such as cdda2wav, cdparanoia goes to great lengths to try to extract the audio information without any artifacts such as jitter. Package: libcdparanoia0-dev Source: cdparanoia Version: 3.10.2+debian-1 Architecture: i386 Maintainer: Daniel Baumann Installed-Size: 404 Depends: libcdparanoia0 (= 3.10.2+debian-1) Homepage: http://www.xiph.org/paranoia/ Priority: optional Section: libdevel Filename: pool/main/c/cdparanoia/libcdparanoia0-dev_3.10.2+debian-1_i386.deb Size: 152206 SHA256: a18c344f86b9313b8d32ee63882bd30d45953b82fa752673cb737b0e8dea9587 SHA1: 7338b795762b72582a4f7423c013cbf000e717ca MD5sum: 41327ccec4a7bd9be2730d3c7b7543ce Description: audio extraction tool for sampling CDs (development) An audio extraction tool for sampling CDs. Unlike similar programs such as cdda2wav, cdparanoia goes to great lengths to try to extract the audio information without any artifacts such as jitter. . This package contains the development files. Package: libow-perl Source: owfs Version: 2.7p29-1 Architecture: i386 Maintainer: Matthias Urlichs Installed-Size: 44 Depends: libc6 (>= 2.4), libowfs27, perl (>= 5.10.0-24ubuntu4), perlapi-5.10.0 Priority: extra Section: misc Filename: pool/main/o/owfs/libow-perl_2.7p29-1_i386.deb Size: 16794 SHA256: 29654d3f739fa820362d868b5fcef89087fee7e9443bdbc60d8fc9f6fa45c791 SHA1: 055cc0b08d834d56c4c0414a7cd3e736c6a7b0dc MD5sum: 882d19343380c8b89938faf09c362430 Description: Dallas 1-wire support: Perl5 bindings The 1-Wire bus is a cheap low-speed bus for devices like weather sensors, access control, etc. It can be attached to your system via serial, USB, I2C, and other interfaces. . This package contains the Perl bindings. Package: libow-php Source: owfs Version: 2.7p29-1 Architecture: i386 Maintainer: Matthias Urlichs Installed-Size: 12 Depends: php5-common Priority: extra Section: misc Filename: pool/main/o/owfs/libow-php_2.7p29-1_i386.deb Size: 3394 SHA256: 6b051667686aacd6a91060f80e9aef893161f3795faca86d039aae77e74b50a1 SHA1: bf7d472acc68a750a32b1e322e1420ab9f0d36d1 MD5sum: f6dca569000fd8ee3b46c32b589bf329 Description: Dallas 1-wire support: PHP5 bindings The 1-Wire bus is a cheap low-speed bus for devices like weather sensors, access control, etc. It can be attached to your system via serial, USB, I2C, and other interfaces. . This package contains the PHP5 bindings. Package: libowfs27 Source: owfs Version: 2.7p29-1 Architecture: i386 Maintainer: Matthias Urlichs Installed-Size: 684 Depends: libc6 (>= 2.7), libgcc1 (>= 1:4.1.1), libusb-0.1-4 (>= 2:0.1.12) Priority: extra Section: libs Filename: pool/main/o/owfs/libowfs27_2.7p29-1_i386.deb Size: 252418 SHA256: 8640b212778ec30bba60711aed6d8b43d77e334e637986bbbf4f2da97d315cfa SHA1: ef0412a2899468f492aaf45d856b3345792cfd7b MD5sum: f709c93d7e0e2466106973e6ea4f3bd6 Description: Dallas 1-wire support: libraries The 1-Wire bus is a cheap low-speed bus for devices like weather sensors, access control, etc. It can be attached to your system via serial, USB, I2C, and other interfaces. . This package contains the shared libraries. Package: libownet-perl Source: owfs Version: 2.7p29-1 Architecture: all Maintainer: Matthias Urlichs Installed-Size: 60 Depends: perl Priority: extra Section: misc Filename: pool/main/o/owfs/libownet-perl_2.7p29-1_all.deb Size: 24132 SHA256: e0547b6bfe0cb97e3ce829633c5b2447c9eb55e4b58df72adce61e00c8419e21 SHA1: 4d68958653a18b4701bfc902b81758b414c940b3 MD5sum: 2348751241757c367c4235d3d2f1f413 Description: Dallas 1-wire support: Perl5 bindings The 1-Wire bus is a cheap low-speed bus for devices like weather sensors, access control, etc. It can be attached to your system via serial, USB, I2C, and other interfaces. . This package contains the Perl library to access a remote owserver. Package: libownet-php Source: owfs Version: 2.7p29-1 Architecture: all Maintainer: Matthias Urlichs Installed-Size: 24 Depends: php5-common Priority: extra Section: misc Filename: pool/main/o/owfs/libownet-php_2.7p29-1_all.deb Size: 5178 SHA256: 2ed6eff471f89dcb4301c1756ea08f9f944fa13bce2b862de7edbd567cd2522d SHA1: f178c67aae4cb426a601b78b7ce5024fbe2c1c8b MD5sum: 0255d24a74cd77275179b54c09fdf4c7 Description: Dallas 1-wire support: PHP bindings The 1-Wire bus is a cheap low-speed bus for devices like weather sensors, access control, etc. It can be attached to your system via serial, USB, I2C, and other interfaces. . This package contains the PHP library to access a remote owserver. Package: libownet27 Source: owfs Version: 2.7p29-1 Architecture: i386 Maintainer: Matthias Urlichs Installed-Size: 12 Priority: extra Section: libs Filename: pool/main/o/owfs/libownet27_2.7p29-1_i386.deb Size: 3390 SHA256: f6ecad8e560694e92f4fc58efce5ccab56dfb1de7368c05971debd202ef657de SHA1: 99a3ac4c644f621c4eb37b176c876f5ebee6b0a5 MD5sum: 794c27a03f35bd84ff5e181142a2443b Description: Dallas 1-wire support: libraries The 1-Wire bus is a cheap low-speed bus for devices like weather sensors, access control, etc. It can be attached to your system via serial, USB, I2C, and other interfaces. . This package contains the shared library to access a remote owserver. Package: libshlock-perl Source: shlock Version: 1.24 Architecture: all Maintainer: Matthias Urlichs Installed-Size: 20 Depends: perl Priority: optional Section: admin Filename: pool/main/s/shlock/libshlock-perl_1.24_all.deb Size: 6692 SHA256: e0ce30b2bab1e87b1892ec02c0a9a493825112f1940a5d41bbae87b7e6374983 SHA1: 1b1c107ea8bc11e5dcde44d2a3959ebd87c072e8 MD5sum: 9701756859fffdb1ebd98dec3c39c863 Description: Locking for Perl scripts This package provides pidfile-style locking for perl scripts. Lockfile locations default to /var/lock. The shell version is compatible to innd's shlock program. . Stale locks are recognized correctly. Waiting for a lock to go away is NOT a feature of this program; this is intentional. Package: linux-headers-misdn Source: misdn-kernel Version: 1.2.0-0smurf1 Architecture: all Maintainer: Simon Richter Installed-Size: 84 Priority: extra Section: comm Filename: pool/main/m/misdn-kernel/linux-headers-misdn_1.2.0-0smurf1_all.deb Size: 10688 SHA256: 06c0df5d426d96c07183b7deb46089742e5303b576325ff436c1ed1d955854d1 SHA1: f9969ce6bbc6aa6cd644e5feff62ee63d34d3504 MD5sum: b766811353251960dcccb2f4c63abc25 Description: Header files for the mISDN drivers The modular ISDN drivers are the bleeding edge implementation of ISDN support in the Linux kernel. The most prominent new feature is support for ISDN cards in NT mode, so you can connect an ISDN telephone to your computer. . You need this package if you intend to compile userspace applications that access mISDN specific interfaces. Package: merkaartor Version: 0.13.2-1 Architecture: i386 Maintainer: Bernd Zeimetz Installed-Size: 5532 Depends: libc6 (>= 2.4), libexiv2-4, libgcc1 (>= 1:4.1.1), libgdal1-1.5.0, libqt4-network (>= 4.4.3), libqt4-svg (>= 4.4.3), libqt4-webkit (>= 4.4.3), libqt4-xml (>= 4.4.3), libqtcore4 (>= 4.4.3), libqtgui4 (>= 4.4.3), libstdc++6 (>= 4.1.1), libxml2 (>= 2.6.27), libxslt1.1 (>= 1.1.18), proj, zlib1g (>= 1:1.1.4) Homepage: http://www.merkaartor.org/ Priority: extra Section: science Filename: pool/main/m/merkaartor/merkaartor_0.13.2-1_i386.deb Size: 2371656 SHA256: 25dc30af28909039050a9f8afadc8df6f577bd4bfc55c2289acc33b6fdaf181d SHA1: e27ea3ffa714f41574cef0a8a05557ddcd18047b MD5sum: cf2e5f3feedfe6a05120c3f097654211 Description: map editor for OpenStreetMap.org Merkaartor is a map editor for OpenStreetMap.org, the free editable map of the whole world. . Features: * download from and upload to the OpenStreetMap server * open .osm and .gpx files * create and move trackpoints, ways, and areas * add tags, delete features * reverse, split and join ways * visualize some leisure/landuse areas and road types * displaying GPS information Package: misdn-source Source: misdn-kernel Version: 1.2.0-0smurf1 Architecture: all Maintainer: Simon Richter Installed-Size: 324 Depends: make, debhelper (>> 4) Recommends: module-assistant | kernel-package Conflicts: misdn-kernel-source (<< 1.2.0-0smurf1) Replaces: misdn-kernel-source (<< 1.2.0-0smurf1) Provides: misdn-kernel-source Priority: extra Section: comm Filename: pool/main/m/misdn-kernel/misdn-source_1.2.0-0smurf1_all.deb Size: 293224 SHA256: acb62596e6727dd67007a3ec7a87ebbc94fdb29c02373e91119a1de2f77a3dc8 SHA1: 52bbbaf568206f967019d39e8da4862985c57708 MD5sum: fb78b3b3fd57970cd113fe8cfbc65aad Description: Source code for the mISDN modules The modular ISDN drivers are the bleeding edge implementation of ISDN support in the Linux kernel. The most prominent new feature is support for ISDN cards in NT mode, so you can connect an ISDN telephone to your computer. . You need this package if you want to compile the mISDN modules to accompany your custom kernel. If you are using a kernel shipped by Debian, you can also install the corresponding misdn-kernel-modules-... package. Package: moat-gpio Version: 0.2.3-1 Architecture: all Maintainer: Matthias Urlichs Installed-Size: 63 Depends: python3-trio-amqp, python3-trio-click, python3-trio-gpio, python3:any (>= 3.3.2-2~) Recommends: wiringpi Conflicts: python3-moat-gpio Replaces: python3-moat-gpio Homepage: https://github.com/M-o-a-T/ Priority: optional Section: python Filename: pool/main/m/moat-gpio/moat-gpio_0.2.3-1_all.deb Size: 10560 SHA256: 330a9437fbea704a7d47245a2505baf16bfc6d83a5b66bebd653abc3ad12c314 SHA1: 9d621f6c483f8008070de11015d2cf91469d5b9b MD5sum: 06ae37f0db05696eafbea3921200b9e7 Description: Control GPIO lines via AMQP This program controls GPIO lines via AMQP. Currently it supports basic Linux GPIO features, i.e. input, output, and line monitoring. . There's also a mode to toggle a GPIO line depending on the data, e.g. "open" turns GPIO1 on and off, "close" signals GPIO2. Package: openttd Version: 1.0.1-0 Architecture: i386 Maintainer: Matthijs Kooijman Installed-Size: 9976 Depends: libc6 (>= 2.7), libfontconfig1 (>= 2.4.0), libfreetype6 (>= 2.2.1), libgcc1 (>= 1:4.1.1), libicu40 (>= 4.0-1), liblzo2-2, libpng12-0 (>= 1.2.13-4), libsdl1.2debian (>= 1.2.10-1), libstdc++6 (>= 4.1.1), zlib1g (>= 1:1.1.4) Recommends: openttd-opengfx, x11-utils Suggests: openttd-opensfx, timidity, freepats Conflicts: openttd-data Replaces: openttd-data Homepage: http://www.openttd.org/ Priority: optional Section: games Filename: pool/main/o/openttd/openttd_1.0.1-0_i386.deb Size: 3838340 SHA256: d8f59552ae3a16e62d683b5d23fbf4746ae851f999199bccdcec76a35638e0f9 SHA1: 46b275d6be42f2ab5eecfe689c8c32761f36e99a MD5sum: 7c8677d2e3355da7b46f5942b2a83349 Description: reimplementation of Transport Tycoon Deluxe with enhancements OpenTTD is a reimplementation of the Microprose game "Transport Tycoon Deluxe" with lots of new features and enhancements. . OpenTTD is playable with the free graphics files from the openttd-opengfx package and optional sound files from the openttd-opensfx package (which is in non-free). Alternatively, OpenTTD can use the graphics files from the original Transport Tycoon Deluxe game (See README.Debian on how to set this up). Package: ow-tools Source: owfs Version: 3.2p3+git1-ba66022-4 Architecture: all Maintainer: Vincent Danjean Installed-Size: 109 Depends: tk Suggests: owserver Breaks: ow-shell (<< 2.9p5) Replaces: ow-shell (<< 2.9p5) Homepage: http://owfs.org/ Priority: extra Section: electronics Filename: pool/main/o/owfs/ow-tools_3.2p3+git1-ba66022-4_all.deb Size: 27596 SHA256: 30c73a99e03ca18aa139018bb9acf710da672382003a7785a4143a8b1adc2ca0 SHA1: 3ea5153a9e778a090f7e5dc86e50e5b3c2fcf406 MD5sum: d0ed8c1af4590118350b1100d620dcc6 Description: tools to monitor or inspect a ow-server link The 1-Wire bus is a cheap low-speed bus for devices like weather sensors, access control, etc. It can be attached to your system via serial, USB, I2C, and other interfaces. . This package includes two TclTk tools: * owtap: inspect network transmission of the owserver protocol * owmon: show statistics and setting for an owserver Package: owfs Version: 3.2p3+git1-ba66022-4 Architecture: all Maintainer: Vincent Danjean Installed-Size: 24 Depends: owfs-fuse (>= 3.2p3+git1-ba66022-4), owserver (>= 3.2p3+git1-ba66022-4), owhttpd (>= 3.2p3+git1-ba66022-4), owftpd (>= 3.2p3+git1-ba66022-4) Suggests: owfs-doc Homepage: http://owfs.org/ Priority: extra Section: electronics Filename: pool/main/o/owfs/owfs_3.2p3+git1-ba66022-4_all.deb Size: 8126 SHA256: 2178e2a56edab7126015bf1f56401a03665e1f120439a97594d72aeeb654e9e2 SHA1: c8a63a79a6cd13d6ef354eedf7575321832ec8fc MD5sum: 66de54046b5b62ddd43e4e976b90c39f Description: Dallas 1-wire support The 1-Wire bus is a cheap low-speed bus for devices like weather sensors, access control, etc. It can be attached to your system via serial, USB, I2C, and other interfaces. . This package is a metapackage depending on various other OWFS packages. Installing this package gets you a FUSE daemon, server arbitrates access to the bus from multiple client processes, small ftp and webserver. Package: owfs-common Source: owfs Version: 3.2p3+git1-ba66022-4 Architecture: all Maintainer: Vincent Danjean Installed-Size: 48 Depends: ucf Multi-Arch: foreign Homepage: http://owfs.org/ Priority: extra Section: electronics Filename: pool/main/o/owfs/owfs-common_3.2p3+git1-ba66022-4_all.deb Size: 15180 SHA256: 344dc7de5bfbda91a61d969eda6f355547fe5b9b6a4a92e225cd288aa856c2c2 SHA1: 7c08d18806194f847a016f0f1e083ed7d2bda6ad MD5sum: ad2096549171dc814655af6ade1c95c5 Description: common files used by any of the OWFS programs The 1-Wire bus is a cheap low-speed bus for devices like weather sensors, access control, etc. It can be attached to your system via serial, USB, I2C, and other interfaces. . This package contains the common files that are used by any of the OWFS programs. Package: owfs-dbg Source: owfs Version: 2.7p29-1 Architecture: i386 Maintainer: Matthias Urlichs Installed-Size: 3168 Priority: extra Section: misc Filename: pool/main/o/owfs/owfs-dbg_2.7p29-1_i386.deb Size: 1149756 SHA256: bf41ddd8404039747f719cfe173f0a8995cb3244182b7a95897003d5151f37d5 SHA1: 4e4796f747417c7375c8422c093171c4b362ffa3 MD5sum: eb8facc825573e7287990fc1837249fb Description: Debug symnbols for owfs The 1-Wire bus is a cheap low-speed bus for devices like weather sensors, access control, etc. It can be attached to your system via serial, USB, I2C, and other interfaces. . This package contains the debug symbol files. Package: owfs-dev Source: owfs Version: 2.7p29-1 Architecture: i386 Maintainer: Matthias Urlichs Installed-Size: 36 Priority: extra Section: libdevel Filename: pool/main/o/owfs/owfs-dev_2.7p29-1_i386.deb Size: 10704 SHA256: 77ae8f1358de59a62440c264fb629db2f20129149da9064aab4aea742b63e2b8 SHA1: 25159936c1175fcb891c4b8a39a6413e26f2be3c MD5sum: 37027bf2636387fc9ca68a47e610ccc1 Description: Dallas 1-wire support: development files The 1-Wire bus is a cheap low-speed bus for devices like weather sensors, access control, etc. It can be attached to your system via serial, USB, I2C, and other interfaces. . This package contains the development libraries and interfaces. Package: owfs-doc Source: owfs Version: 3.2p3+git1-ba66022-4 Architecture: all Maintainer: Vincent Danjean Installed-Size: 281 Suggests: owfs Homepage: http://owfs.org/ Priority: extra Section: doc Filename: pool/main/o/owfs/owfs-doc_3.2p3+git1-ba66022-4_all.deb Size: 197010 SHA256: bdd41de194a1e1903add4d02d0cccb0ea4d082fa054a7c64c6799a20e32f5aa2 SHA1: ae41fb66a805bba9c356d6feeb9c8e4184497b04 MD5sum: 5eb428e520d33ca13ce6e8bd63a193e2 Description: Dallas 1-wire support: Documentation for owfs The 1-Wire bus is a cheap low-speed bus for devices like weather sensors, access control, etc. It can be attached to your system via serial, USB, I2C, and other interfaces. . Documentation for OWFS in 'man' format. This package contains the manpages for 1-Wire, including the device-specific manpages. Package: owfs-tcl Source: owfs Version: 2.7p29-1 Architecture: i386 Maintainer: Matthias Urlichs Installed-Size: 140 Depends: libc6 (>= 2.8), libowfs27, tcl8.4 (>= 8.4.16) Priority: extra Section: misc Filename: pool/main/o/owfs/owfs-tcl_2.7p29-1_i386.deb Size: 36868 SHA256: 5f0ebcef426e1d3445dda8e4765ba5d3d7c8f37f9c73e2d92949466b148584cd SHA1: b37b3b995574279e6b3a68a2a8774513f768324d MD5sum: b017350d1d82f997ceebd26eda1a2455 Description: Dallas 1-wire support: TCL bindings The 1-Wire bus is a cheap low-speed bus for devices like weather sensors, access control, etc. It can be attached to your system via serial, USB, I2C, and other interfaces. . This package contains the TCL bindings and support programs written in tcl/tk. One of them is "owtap", an OWFS-specific protocol monitor. Package: ownet-dev Source: owfs Version: 2.7p29-1 Architecture: i386 Maintainer: Matthias Urlichs Installed-Size: 20 Priority: extra Section: libdevel Filename: pool/main/o/owfs/ownet-dev_2.7p29-1_i386.deb Size: 5130 SHA256: f0877ffadd9f58aa65c2c906312c6482e2b1df11a3c715b8b6f07a625fbfabac SHA1: d607764756dac2fbf6bca32767934a4a415039ac MD5sum: cf3dfd877a959191ee611f76c83941b6 Description: Dallas 1-wire support: development files The 1-Wire bus is a cheap low-speed bus for devices like weather sensors, access control, etc. It can be attached to your system via serial, USB, I2C, and other interfaces. . This package contains the development libraries and interfaces to access a remote owserver. Package: python-amqp Version: 1.4.5+git1-721a753db-3 Architecture: all Maintainer: Debian Python Modules Team Installed-Size: 190 Depends: python (>= 2.7), python (<< 2.8) Suggests: python-amqp-doc Homepage: https://github.com/celery/py-amqp Priority: extra Section: python Filename: pool/main/p/python-amqp/python-amqp_1.4.5+git1-721a753db-3_all.deb Size: 40704 SHA256: e265ff0ce344da00f33e2463f3bf608422e7c8a42b684fbd395cac4ce16f6ef6 SHA1: 90d1cdd20d4823388f17dee179fcb006ead063c3 MD5sum: 54f6c9ac3b2323bcfce469c2caae155e Description: Low-level AMQP client This is a fork of amqplib which was originally written by Barry Pederson. It is maintained by the Celery project, and used by kombu as a pure Python alternative when librabbitmq is not available. . This library should be API compatible with librabbitmq. Differences from amqplib are: * Supports draining events from multiple channels (Connection.drain_events). * Support for timeouts. * Channels are restored after channel error, instead of having to close the connection. * Support for heartbeats. * Supports RabbitMQ extensions: - Consumer Cancel Notifications. - Publisher confirms. - Exchange-to-exchange bindings: exchange_bind / exchange_unbind. * Support for basic_return. * Uses AMQP 0-9-1 instead of 0-8. * Exposes the underlying socket as Connection.sock. * Adds Channel.no_ack_consumers to keep track of consumer tags that set the no_ack flag. * Slightly better at error recovery. Package: python-amqp-doc Source: python-amqp Version: 1.4.5+git1-721a753db-3 Architecture: all Maintainer: Debian Python Modules Team Installed-Size: 372 Depends: libjs-sphinxdoc (>= 1.0) Homepage: https://github.com/celery/py-amqp Priority: extra Section: doc Filename: pool/main/p/python-amqp/python-amqp-doc_1.4.5+git1-721a753db-3_all.deb Size: 60958 SHA256: 8074d37e3e2e5acb6e357f229ab37a98bd310452d58cb2b298b3a3ab884bbdbd SHA1: 75162f313080bad1d08517d035da7c13d8905545 MD5sum: eaf3e65739895f1e0071464b014b3430 Description: Low-level AMQP client (Documentation) This is a fork of amqplib which was originally written by Barry Pederson. It is maintained by the Celery project, and used by kombu as a pure Python alternative when librabbitmq is not available. . This library should be API compatible with librabbitmq. Differences from amqplib are: * Supports draining events from multiple channels (Connection.drain_events). * Support for timeouts. * Channels are restored after channel error, instead of having to close the connection. * Support for heartbeats. * Supports RabbitMQ extensions: - Consumer Cancel Notifications. - Publisher confirms. - Exchange-to-exchange bindings: exchange_bind / exchange_unbind. * Support for basic_return. * Uses AMQP 0-9-1 instead of 0-8. * Exposes the underlying socket as Connection.sock. * Adds Channel.no_ack_consumers to keep track of consumer tags that set the no_ack flag. * Slightly better at error recovery. . This package contains the documentation. Package: python-blinker Source: blinker Version: 1.4~git1-746b6777a-3 Architecture: all Maintainer: Debian Python Modules Team Installed-Size: 170 Depends: python (>= 2.7), python (<< 2.8) Homepage: http://pythonhosted.org/blinker/ Priority: optional Section: python Filename: pool/main/b/blinker/python-blinker_1.4~git1-746b6777a-3_all.deb Size: 41282 SHA256: 9ceaef990920011c0c354d9917f5974f61ed4439641340d1c9980f9787394264 SHA1: 0a747b7782d197bc10c8738ddea4d1dd32a4b6d9 MD5sum: 18a1ca353b959ca09b53a8f08a71f05a Description: Fast, simple object-to-object and broadcast signaling library Blinker provides a fast dispatching system that allows any number of interested parties to subscribe to events, or "signals". . Signal receivers can subscribe to specific senders or receive signals sent by any sender. Package: python-django Version: 1.4~smurf-1 Architecture: all Maintainer: Chris Lamb Installed-Size: 19231 Depends: python2.6 | python2.7, python (>= 2.6.6-7~), python (<< 2.8) Recommends: libjs-jquery Suggests: python-psycopg2, python-psycopg, python-mysqldb, python-flup, python-sqlite, python-yaml Homepage: http://www.djangoproject.com/ Priority: optional Section: python Filename: pool/main/p/python-django/python-django_1.4~smurf-1_all.deb Size: 4326778 SHA256: 284b1e9a1705dceed859b61c10ea3d0a3119f807e82edba51b420f9dc2ba3e68 SHA1: da9f2851c74ada85f49fe681e98978c1f8aa47ae MD5sum: 3a8c05de90823431e9128947135db3f9 Description: High-level Python web development framework Django is a high-level web application framework that loosely follows the model-view-controller design pattern. . Python's equivalent to Ruby on Rails, Django lets you build complex data-driven websites quickly and easily - Django focuses on automating as much as possible and adhering to the "Don't Repeat Yourself" (DRY) principle. . Django additionally emphasizes reusability and "pluggability" of components; many generic third-party "applications" are available to enhance projects or to simply to reduce development time even further. . Notable features include: * An object-relational mapper (ORM) * Automatic admin interface * Elegant URL dispatcher * Form serialization and validation system * Templating system * Lightweight, standalone web server for development and testing * Internationalization support * Testing framework and client Package: python-django-doc Source: python-django Version: 1.4~smurf-1 Architecture: all Maintainer: Chris Lamb Installed-Size: 13173 Depends: libjs-sphinxdoc (>= 1.0) Homepage: http://www.djangoproject.com/ Priority: optional Section: doc Filename: pool/main/p/python-django/python-django-doc_1.4~smurf-1_all.deb Size: 3092260 SHA256: 80d070570d36f6a106eb8832ee71e0bfb006ded39e34c6194cd8260e48d84a92 SHA1: 8b9b9f6005f296aaa8719968439bac0b2515d202 MD5sum: f39f8f4fedff29c2d5a1582eb1345de1 Description: High-level Python web development framework (documentation) Django is a high-level web application framework that loosely follows the model-view-controller design pattern. . Python's equivalent to Ruby on Rails, Django lets you build complex data-driven websites quickly and easily - Django focuses on automating as much as possible and adhering to the "Don't Repeat Yourself" (DRY) principle. . Django additionally emphasizes reusability and "pluggability" of components; many generic third-party "applications" are available to enhance projects or to simply to reduce development time even further. . This package contains the HTML documentation and example projects. Package: python-django-jinja Source: django-jinja Version: 0.20-1 Architecture: all Maintainer: Andrey Antukh Installed-Size: 35 Depends: python (>= 2.7), python (<< 2.8), python-jinja2, python-django Priority: optional Section: python Filename: pool/main/d/django-jinja/python-django-jinja_0.20-1_all.deb Size: 11438 SHA256: 6c775766f0603178df6a91058ee598496b221453a6ec5246e3d7ad131b5e822b SHA1: 2c8513d2c06d967df72f788db689c01ef789c6bf MD5sum: 78e9077853e48e7220520aee5c524cd6 Description: Jinja2 templating language integrated in Django. Package: python-django-multilingual Version: 0~r61-1 Architecture: all Maintainer: Matthias Urlichs Installed-Size: 248 Depends: python-django, python-support (>= 0.2) Provides: python2.5-django-multilingual, python2.3-django-multilingual, python2.4-django-multilingual Priority: extra Section: python Filename: pool/main/p/python-django-multilingual/python-django-multilingual_0~r61-1_all.deb Size: 26926 SHA256: 90db3550cf0105be15ebbd6a3bfa1b72a69e6b0d9eaf5bf8b4309e0e4b4089c6 SHA1: 379b9d3d184d67d7887d9a2a89180ddd99dd8f2c MD5sum: 33ee2e6a4165e778b3467119c4df0ccd Description: A multilingual extension for Django This module adds transparent translatable table columns to Django. Package: python-djinja Source: djinja Version: 0.7-1 Architecture: all Maintainer: Syrus Akbary Nieto Installed-Size: 185 Depends: python2.7 | python2.6, python (>= 2.6.6-7~), python (<< 2.8), python-django, python-jinja2 Priority: optional Section: python Filename: pool/main/d/djinja/python-djinja_0.7-1_all.deb Size: 40496 SHA256: 4b1e4323b120b7aab8d110bdf153a23c4f1f67f20e9bea1d3409681f9460c587 SHA1: d931b90677f9818102500a28be8533c7a15c6324 MD5sum: 3a98fac9f81da95cf91f3b7a8f87d187 Description: A package that makes possible the integration of Jinja2 in D ====== Djinja ====== . Djinja tries to **integrate Jinja2 in Django**. The aim is to replace completely the Django's template system, **including administration**. . Currently, the following templating modules have been written and are working: . - Django administration - Django Debug Toolbar . In a near future, you could convert **Django templates syntax to Jinja2 syntax**, isn't awesome? . If you have ideas please let us know. . Installation ============ . #. Add the `djinja` directory to your Python path. Package: python-dogpile.cache Version: 0.5.4-1 Architecture: all Maintainer: PKG OpenStack Installed-Size: 115 Pre-Depends: dpkg (>= 1.15.6~) Depends: python (>= 2.7), python (<< 2.8), python-dogpile.core Homepage: http://bitbucket.org/zzzeek/dogpile.cache Priority: optional Section: python Filename: pool/main/p/python-dogpile.cache/python-dogpile.cache_0.5.4-1_all.deb Size: 28382 SHA256: cad7e57df3ee7cb220d8a36b656963be669e3ab35737b769ab32e2774288097e SHA1: 25f462c9b2f2f2a6786142a570a0e847d87d37f4 MD5sum: ccbc82ef1890e761887d80a12a3de970 Description: caching front-end based on the Dogpile lock A caching API built around the concept of a "dogpile lock", which allows continued access to an expiring data value while a single thread generates a new value. . dogpile.cache builds on the dogpile.core locking system (see http://pypi.python.org/pypi/dogpile.core), which implements the idea of "allow one creator to write while others read" in the abstract. Overall, dogpile.cache is intended as a replacement to the Beaker (see http://beaker.groovie.org) caching system, the internals of which are written by the same author. All the ideas of Beaker which "work" are re-implemented in dogpile.cache in a more efficient and succinct manner, and all the cruft (Beaker's internals were first written in 2005) relegated to the trash heap. Package: python-dogpile.core Version: 0.4.1+git1-e9011d849-2 Architecture: all Maintainer: PKG OpenStack Installed-Size: 26 Pre-Depends: dpkg (>= 1.15.6~) Depends: python (>= 2.7), python (<< 2.8) Homepage: http://bitbucket.org/zzzeek/dogpile.core Priority: optional Section: python Filename: pool/main/p/python-dogpile.core/python-dogpile.core_0.4.1+git1-e9011d849-2_all.deb Size: 9548 SHA256: d403923658b57e85a65c3e8462aa54ce274044d109e4a0cb5bafd94f75651c51 SHA1: b14bcf57cd843efa9278bdbee1761f433a29123c MD5sum: c182b6ad23226d545beef62db0777d6c Description: dogpile lock, typically used as a component of a larger caching solution Python dogpile.core lock allows a single thread to generate an expensive resource while other threads use the old value, until the new"value is ready. . Dogpile is basically the locking code extracted from the Beaker package, for simple and generic usage. Package: python-flask-login Source: flask-login Version: 0.2.11+git1-ae162d3d9-1 Architecture: all Maintainer: Tonnerre LOMBARD Installed-Size: 36 Depends: python (>= 2.7), python (<< 2.8), python-flask Homepage: https://flask-login.readthedocs.org/ Priority: optional Section: python Filename: pool/main/f/flask-login/python-flask-login_0.2.11+git1-ae162d3d9-1_all.deb Size: 12268 SHA256: fa192dc3bdb7698122c7ff0ed100f46262c79638ba1c33b86a39f7d0ab42086e SHA1: 3b357bc017bdc2d1347ea25a4d37592a1c54546c MD5sum: 1bb4096ee66d35bff6fdcd303495a513 Description: user session management for Flask Flask-Login provides user session management for Flask. It handles the common tasks of logging in, logging out, and remembering your users' sessions over extended periods of time. . Flask-Login is not bound to any particular database system or permissions model. The only requirement is that your user objects implement a few methods, and that you provide a callback to the extension capable of loading users from their ID. Package: python-flask-migrate Source: flask-migrate Version: 1.2.0+git1-8e8a4d018-3 Architecture: all Maintainer: Debian Python Modules Team Installed-Size: 16 Depends: python:any (<< 2.8), python-flask (>= 0.9), python-flask-script, python:any (>= 2.7.5-5~), python-flask-sqlalchemy, alembic (>= 0.6) Homepage: https://pypi.python.org/pypi/Flask-Migrate Priority: optional Section: python Filename: pool/main/f/flask-migrate/python-flask-migrate_1.2.0+git1-8e8a4d018-3_all.deb Size: 7062 SHA256: f36754a435b0de12036ef89bc723b5103687204a93ed6f5dc7ffbca2e1fd6d57 SHA1: cb82abf0ae37411c1ce8b3307f74c82b618ae517 MD5sum: fc973e27311884c7f36b913d39d3913e Description: SQLAlchemy database migrations for Flask applications using Alembic Flask-Migrate is an extension that handles SQLAlchemy database migrations for Flask applications using Alembic. The database operations are provided as command line arguments for Flask-Script. Package: python-flask-principal Source: flask-principal Version: 0.4.0+git1-81ee6b7d6-1 Architecture: all Maintainer: Tonnerre LOMBARD Installed-Size: 20 Depends: python:any (>= 2.7.5-5~), python:any (<< 2.8), python-blinker, python-flask Homepage: https://flask-principal.readthedocs.org/ Priority: optional Section: python Filename: pool/main/f/flask-principal/python-flask-principal_0.4.0+git1-81ee6b7d6-1_all.deb Size: 8296 SHA256: 95a362cf28623732496341fa0f167e9bc2123b44f518a640c9599e73bf368396 SHA1: ba660d5c96d962225c8f53447e7fd0aac94c6dce MD5sum: 10cbad4c75fa1e2cc2ed8989145922f6 Description: identity management for Flask Flask-Principal provides a very loose framework to tie in providers of two types of service, often located in different parts of a web application: . - Authentication providers - User information providers . For example, an authentication provider may be oauth, using Flask-OAuth and the user information may be stored in a relational database. Looseness of the framework is provided by using signals as the interface. . This is the Python 2 version of the package. Package: python-flask-wtf Source: flask-wtf Version: 0.9.5+git1-11e7e8e27-2 Architecture: all Maintainer: Debian Python Modules Team Installed-Size: 325 Depends: python (>= 2.7), python (<< 2.8), python-flask, python-wtforms Recommends: libjs-jquery Suggests: python-flask-babel Conflicts: python-flaskext-wtf, python-flaskext.wtf Replaces: python-flaskext-wtf, python-flaskext.wtf Provides: python2.7-flask-wtf Homepage: http://packages.python.org/Flask-WTF/ Priority: optional Section: python Filename: pool/main/f/flask-wtf/python-flask-wtf_0.9.5+git1-11e7e8e27-2_all.deb Size: 76556 SHA256: ce1a94a0fc1ebaf11c60a44d0b1c07ede3fc39f57baede7c46398a9e81f801f9 SHA1: 510f02729db73bc629d6262a3727939593d28164 MD5sum: c6ca0d46eaf1cd2f9c69a8b35ca0809d Description: Simple integration of Flask and WTForms Flask-WTF is an extension for Flask, providing a simple integration of WTForms. It includes optional CSRF handling and Recaptcha support. Package: python-formalchemy Version: 1.5.3-1 Architecture: all Maintainer: Shell Xu Installed-Size: 854 Depends: python (>= 2.7), python (<< 2.8), python-sqlalchemy, python-tempita, python-webhelpers2, python-webob, python-markupsafe, python-pylons Suggests: python-beautifulsoup Homepage: http://docs.formalchemy.org/ Priority: optional Section: python Filename: pool/main/p/python-formalchemy/python-formalchemy_1.5.3-1_all.deb Size: 96412 SHA256: abed712d9cfe1468d17c66eea54996a7354e433dfd15490c2fd8ae513778f3a4 SHA1: 39a00fdf6aca5c4896e6558fed462b50d50c2c43 MD5sum: 1e2574e454d3360c7b1c3c92680f605f Description: HTML input form fields from your SQLAlchemy mapped classes FormAlchemy greatly speeds development with SQLAlchemy mapped classes (models) in a HTML forms environment. . FormAlchemy eliminates boilerplate by autogenerating HTML input fields from a given model. FormAlchemy will try to figure out what kind of HTML code should be returned by introspecting the model's properties and generate ready-to-use HTML code that will fit the developer's application. . Of course, FormAlchemy can't figure out everything, i.e, the developer might want to display only a few columns from the given model. Thus, FormAlchemy is also highly customizable. Package: python-hamlish-jinja Source: hamlish-jinja Version: 0.3.3-dev-2 Architecture: all Maintainer: Matthias Urlichs Installed-Size: 28 Depends: python (>= 2.7), python (<< 2.8), python-jinja2 Priority: optional Section: python Filename: pool/main/h/hamlish-jinja/python-hamlish-jinja_0.3.3-dev-2_all.deb Size: 9012 SHA256: 7e26386d0cd53287f55c71a9b479ef744f8fbab28453ec0ce83980c2a5549906 SHA1: f3e767a11c9b6aaae2321a9883e951caa23b358f MD5sum: 365a0141b5b56951ce060be2ec46b657 Description: Haml-ish syntax for jinja2 templates . This extension to jinja make it possible to use a `haml `_-ish syntax for your jinja2 templates. . Example template:: . -extends 'base.html' -block title << Memberlist -block content: %ul id="memberlist" -for user in users: %li %a href="{{ user.url }}" << {{ user.username }} . For more information read the `documentation `_ Package: python-jinja2 Source: jinja2 Version: 2.8~git1-4d1674682-1 Architecture: all Maintainer: Piotr Ożarowski Installed-Size: 931 Depends: python (>= 2.7), python (<< 2.8), python-markupsafe Recommends: python-pkg-resources Suggests: python-jinja2-doc Enhances: python-pybabel Homepage: http://jinja.pocoo.org/2/ Priority: optional Section: python Filename: pool/main/j/jinja2/python-jinja2_2.8~git1-4d1674682-1_all.deb Size: 171242 SHA256: 18ce0eaadda47731601859212a815ea708b3200a6a0e34df62d880de77307ae4 SHA1: d8a7316f1a590cdfe0d0765d825cec2008ef46a4 MD5sum: 2f3f336b08878bb0d19f92cdaea0ea50 Description: small but fast and easy to use stand-alone template engine Jinja2 is a template engine written in pure Python. It provides a Django inspired non-XML syntax but supports inline expressions and an optional sandboxed environment. . The key-features are: * Configurable syntax. If you are generating LaTeX or other formats with Jinja2 you can change the delimiters to something that integrates better into the LaTeX markup. * Fast. While performance is not the primarily target of Jinja2 it’s surprisingly fast. The overhead compared to regular Python code was reduced to the very minimum. * Easy to debug. Jinja2 integrates directly into the Python traceback system which allows you to debug Jinja2 templates with regular Python debugging helpers. * Secure. It’s possible to evaluate untrusted template code if the optional sandbox is enabled. This allows Jinja2 to be used as templating language for applications where users may modify the template design. Package: python-jinja2-doc Source: jinja2 Version: 2.8~git1-4d1674682-1 Architecture: all Maintainer: Piotr Ożarowski Installed-Size: 873 Depends: libjs-sphinxdoc (>= 1.0) Recommends: python-jinja2 Homepage: http://jinja.pocoo.org/2/ Priority: extra Section: doc Filename: pool/main/j/jinja2/python-jinja2-doc_2.8~git1-4d1674682-1_all.deb Size: 146654 SHA256: cb80103cbcec9f5f1665d574343a21a6f7337e7e5f352c800ff0bb69483e1077 SHA1: 3d5835d5ce23089852cc343fd9b57dd563ba044e MD5sum: 58e6ab565c743ea36ad35e33d98e7c38 Description: documentation for the Jinja2 Python library Jinja2 is a small but fast and easy to use stand-alone template engine . This package contains the documentation for Jinja2 in HTML and reStructuredText formats. Package: python-ow Source: owfs Version: 2.7p29-1 Architecture: i386 Maintainer: Matthias Urlichs Installed-Size: 40 Depends: python (>= 2.4) Provides: python2.5-ow, python2.6-ow Priority: extra Section: misc Filename: pool/main/o/owfs/python-ow_2.7p29-1_i386.deb Size: 7036 SHA256: b61226879c2c709b81489e791f0efcdb962a48f4c10ddcd73a50d3768c4cac37 SHA1: 78a15860a4ab5e035f0f4a41bbcb136dd77317da MD5sum: 69cc8364f8dc0af9bad980b4dcd8f7ba Description: Dallas 1-wire support: Python bindings The 1-Wire bus is a cheap low-speed bus for devices like weather sensors, access control, etc. It can be attached to your system via serial, USB, I2C, and other interfaces. . This package contains the Python bindings. Python-Version: >= 2.4 Package: python-ownet Source: owfs Version: 3.2p3+git1-ba66022-4 Architecture: all Maintainer: Vincent Danjean Installed-Size: 61 Depends: python (<< 2.8), python (>= 2.7), python:any (>= 2.6.6-7~) Provides: python2.7-ownet Homepage: http://owfs.org/ Priority: extra Section: python Filename: pool/main/o/owfs/python-ownet_3.2p3+git1-ba66022-4_all.deb Size: 15368 SHA256: f20e7331866a5bfef4bbd639e23b95c5cc981664c2c62613422ec32b8ed6fae1 SHA1: ce648bd23886f5626164dea5fca3a45019167b2e MD5sum: 640bc09ecea69b2b3628735f432313d1 Description: Python module for accessing 1-wire networks The 1-Wire bus is a cheap low-speed bus for devices like weather sensors, access control, etc. It can be attached to your system via serial, USB, I2C, and other interfaces. . OWnet is a standalone Python module for accessing 1-wire sensors through an owserver. Python-Version: 2.7 Package: python-passlib Version: 1.6.2-2 Architecture: all Maintainer: Julien Danjou Installed-Size: 1302 Depends: python (>= 2.7), python (<< 2.8) Homepage: http://code.google.com/p/passlib/ Priority: extra Section: python Filename: pool/main/p/python-passlib/python-passlib_1.6.2-2_all.deb Size: 237582 SHA256: 17c5c2722504e5c549814ed9fd7d5cc9d69a63847d75936ad3724e2493c90568 SHA1: 167e46d91a827b1f292c9f6257536377c317ca3e MD5sum: 464e4c1089d076b027388da62c2cba0e Description: comprehensive password hashing framework Password hashing library for Python 2, which provides cross-platform implementations of over 20 password hashing algorithms, as well as a framework for managing existing password hashes. It's designed to be useful for a wide range of tasks; from verifying a hash found in /etc/shadow, to providing full-strength password hashing for multi-user applications. Package: python-pyaudio Version: 0.1.0-1 Architecture: i386 Maintainer: Matthias Urlichs Installed-Size: 232 Depends: libc6 (>= 2.6-1), libportaudio2 (>= 19+cvs20060311-1), python-support (>= 0.3.4), python (<< 2.6), python (>= 2.4) Provides: python2.5-pyaudio, python2.4-pyaudio Priority: extra Section: python Filename: pool/main/p/python-pyaudio/python-pyaudio_0.1.0-1_i386.deb Size: 28772 SHA256: 470e82d007b3c04f2ebf7cf0b973b9808bd899fadffb40ea28680ed5e934a5c9 SHA1: ab235e542fdb4b8ac7d2c59bd1b19a8ebf6033ad MD5sum: 02157b294c1bb6a076a4e33001010b5a Description: Python bindings to the PortAudio library These are Python bindings to version 19 of the PortAudio library. . Only synchronous playback and recording is supported, but Python has threads so this is not a serious limitation. Package: python-pyst Version: 0.6.99+git1-7f3e19c6d-1 Architecture: all Maintainer: Debian VoIP Team Installed-Size: 88 Depends: python (>= 2.7), python (<< 2.8) Enhances: asterisk Provides: python2.7-pyst Priority: optional Section: python Filename: pool/main/p/python-pyst/python-pyst_0.6.99+git1-7f3e19c6d-1_all.deb Size: 27964 SHA256: 4853d3d6c9b50f62421f50864a6ef30b9e6a9ce736a1eb88e72247e4d6d28b62 SHA1: c89933c0a84418fb1d89205e379a3fabe550c99d MD5sum: 66c2a797db74ad116a2e130cee3797ab Description: Python module for interacting with the Asterisk PBX Pyst consists of a set of interfaces and libraries to allow programming and control of Asterisk from Python. The library currently supports: . * AGI (Asterisk Gateway Interface) * AMI (Asterisk Manager Interface) * parsing of Asterisk configuration files . It also provides a helper module to display Python AGI backtraces in the Asterisk console. Package: python-rpyc Source: rpyc Version: 3.2.1-1 Architecture: all Maintainer: Tomer Filiba Installed-Size: 296 Depends: python2.7 | python2.6, python (>= 2.6.6-7~), python (<< 2.8) Priority: optional Section: python Filename: pool/main/r/rpyc/python-rpyc_3.2.1-1_all.deb Size: 48736 SHA256: b3794a4adaa9d0b5b1658a4525eb30c09644793797b9d80e557170c35bd6b56f SHA1: 148362852138ac512875687945b39ced69b02336 MD5sum: ff67d910bd013e4b656859551a664bfc Description: Remote Python Call (RPyC), a transparent and symmetric RPC l A symmetric library for transparent RPC, clustering and distributed computing for python, built around the concept of remote services and object proxying Package: python-sqlfuse Version: 0.6.12-1 Architecture: all Maintainer: Matthias Urlichs Installed-Size: 236 Depends: python (<< 2.7), python (>= 2.6), python-central (>= 0.6.11), python2.6, python-twisted-core (>= 10.1), python-sqlmix (>> 0.9.19), fuse-utils (>> 2.8), python-twistfuse (>> 0.1.12), python-argparse, python-passfd Provides: python2.6-sqlfuse Priority: optional Section: python Filename: pool/main/p/python-sqlfuse/python-sqlfuse_0.6.12-1_all.deb Size: 60026 SHA256: 27a17013c2e6bbdd266a0e36e210963ab9e93335203175a549f1754973e732a9 SHA1: 0e3b7eb7cf98c1a1164db7d14f6a2ebdf19a31dc MD5sum: dd1a6dd93a2220663b8664984cf8948a Description: A replicated FUSE filesystem which stores metadata in SQL This filesystem stores the actual contents in a "normal" file system, but all the metadata (directory structure, access rights, etc.) are stored in a SQL database. . Databases already can do replication, so this takes care of the metadata. File contents are replicated by the file system daemons, via a dedicated TCP connection. (Other methods to interconnect are possible.) . Connections between the replication nodes can have any topology. The system will find the shortest available path to fetch a file. . A given database can hold any number of such file systems. Package: python-twistfuse Version: 0.1.12-1 Architecture: all Maintainer: Matthias Urlichs Installed-Size: 96 Depends: python (>= 2.6), python-central (>= 0.6.11), python-twisted-core (>= 10.1), python-sqlmix, fuse-utils (>> 2.8), python-writev (>= 1.1) Breaks: python-sqlfuse (<< 0.6.1-1) Priority: optional Section: python Filename: pool/main/p/python-twistfuse/python-twistfuse_0.1.12-1_all.deb Size: 17264 SHA256: f31533188afdd37b7f9839e37c72de8fcaa3dc9334c7d033e68cdce04f600628 SHA1: ff4a16d92c6ed04c72152b02466821aa4542652c MD5sum: 363ce4521fcaf28010ae827457c50eea Description: A Twisted-style adapter to the FUSE kernel This Python module implements an asynchronous, Twisted-compatible interface to FUSE. It accepts Deferred results for all front-end methods, does not itself fork or block, and does not depend on any other FUSE library (except for the 'fusermount' binary). . A recent kernel is required; there currently is no compatibility mode for older FUSE protocol versions. Python-Version: all Package: python-ultramysql Version: 2.2-1 Architecture: i386 Maintainer: Matthias Urlichs Installed-Size: 100 Depends: libc6 (>= 2.3.6-6~), libgcc1 (>= 1:4.1.1), libstdc++6 (>= 4.1.1), python2.7 | python2.6, python (>= 2.6), python (<< 2.8) Suggests: mysql-server Provides: python2.6-ultramysql, python2.7-ultramysql Homepage: https://github.com/esnme/ultramysql Priority: extra Section: python Filename: pool/main/p/python-ultramysql/python-ultramysql_2.2-1_i386.deb Size: 48536 SHA256: 7e4da5a6f79f1f7b8f1b298fbf52351f3ab9b32434d8beb6b09272f949df1d7f SHA1: a5801c18e4a93266b5816d5671383f1f73228d8e MD5sum: c703ae91a3786399e89e06f34d131a30 Description: Fast MySQL library for Python UltraMySQL is a fast, basic library for talking to a mysql server. It uses the standard Python socket module, thus works with gevent and similar libraries. . UltraMySQL does not conform to the standard Python DBI. It does not support compression, SSL, or old-style passwords. Package: python-werkzeug Version: 0.10~git3-8f311d277-2 Architecture: all Maintainer: Noah Slater Installed-Size: 1059 Depends: python:any (>= 2.7.5-5~), python:any (<< 2.8), libjs-jquery Recommends: python-simplejson | python (>= 2.6), python-openssl, python-pyinotify Suggests: ipython, python-genshi, python-pkg-resources, python-lxml, python-greenlet, python-redis, python-pylibmc | python-memcache, python-werkzeug-doc Homepage: http://werkzeug.pocoo.org/ Priority: optional Section: python Filename: pool/main/p/python-werkzeug/python-werkzeug_0.10~git3-8f311d277-2_all.deb Size: 224036 SHA256: 1b0ed8b370bf34c48c835ec72f2051fe358e30410d65e13d44a76b6957f60062 SHA1: fc90e77e1ef44a9a03d84e893ca1122640e97acb MD5sum: 3867c70fec911aefef72b2eed329ce84 Description: collection of utilities for WSGI applications The Web Server Gateway Interface (WSGI) is a standard interface between web server software and web applications written in Python. . Werkzeug is a lightweight library for interfacing with WSGI. It features request and response objects, an interactive debugging system and a powerful URI dispatcher. Combine with your choice of third party libraries and middleware to easily create a custom application framework. Package: python-werkzeug-doc Source: python-werkzeug Version: 0.10~git3-8f311d277-2 Architecture: all Maintainer: Noah Slater Installed-Size: 2513 Depends: libjs-sphinxdoc (>= 1.0) Conflicts: python-werkzeug (<< 0.9.3+dfsg-2) Replaces: python-werkzeug (<< 0.9.3+dfsg-2) Homepage: http://werkzeug.pocoo.org/ Priority: extra Section: doc Filename: pool/main/p/python-werkzeug/python-werkzeug-doc_0.10~git3-8f311d277-2_all.deb Size: 883768 SHA256: cc18fcd19d6f9361fae68298073fd355add42d816533f924ff6d33d852c50aaa SHA1: 45044e47d7a14e86171a1c9f52b186abb9b1758a MD5sum: 05250f4d44e979e37b335e08badcc7df Description: documentation for the werkzeug Python library Werkzeug is a lightweight library for interfacing with WSGI. It features request and response objects, an interactive debugging system and a powerful URI dispatcher. Combine with your choice of third party libraries and middleware to easily create a custom application framework. Package: python-writev Version: 1.1+smurf1 Architecture: i386 Maintainer: Ryan Smith-Roberts Installed-Size: 19 Depends: libc6 (>= 2.3.6-6~), python2.7 | python2.6, python (>= 2.6), python (<< 2.8) Priority: optional Section: python Filename: pool/main/p/python-writev/python-writev_1.1+smurf1_i386.deb Size: 6494 SHA256: c9f8637c348a5059c906153175934f98e73921df26184d7358d53a858aecbe4a SHA1: e9b0fa67c879eca632bc11dff48711478f6a5139 MD5sum: b39eb3d4a95f03b513e94296603dd174 Description: python interface to the writev(2) system call Package: python-wtforms Source: wtforms Version: 2.0-2 Architecture: all Maintainer: Debian Python Modules Team Installed-Size: 1017 Depends: python (>= 2.7), python (<< 2.8) Recommends: python-dateutil, libjs-jquery Suggests: python-sqlalchemy (>= 0.5), python-django Homepage: http://wtforms.simplecodes.com/ Priority: optional Section: python Filename: pool/main/w/wtforms/python-wtforms_2.0-2_all.deb Size: 164750 SHA256: a5a0f40c799213d1b86ad57014224cdd1cfcfea9887ac6d52f291f24605f5204 SHA1: 3d0e5a17b3e9ebc5c48aa7f0d7fb343d2bac70aa MD5sum: 898b23566ed1797c27ff63d167fc5f06 Description: flexible forms validation and rendering library for Python WTForms is a HTML form field generator which allows full customization with templates, using the template engine of your choice. It also allows to create forms based on ORM models from Django, SqlAlchemy and the Google Appengine. Package: python-yapps Source: yapps2 Version: 2.2.1-3 Architecture: all Maintainer: Matthias Urlichs Installed-Size: 79 Depends: python:any (<< 2.8), python:any (>= 2.7.5-5~) Conflicts: yapps2-runtime Replaces: yapps2-runtime Priority: optional Section: python Filename: pool/main/y/yapps2/python-yapps_2.2.1-3_all.deb Size: 18768 SHA256: 1a4769c4d5aac5bad282ffc04030b69395c813f0553c2e7c3394c9b01e43a434 SHA1: acdafba138de8e33c22ffec814460b47392c60fb MD5sum: 33db13378df2a3f4380091c1c66008f5 Description: Yet Another Python Parser System YAPPS is an easy to use parser generator that is written in Python and generates Python code. There are several parser generator systems already available for Python, but this parser has different goals: Yapps is simple, very easy to use, and produces human-readable parsers. . This package contains the Python2 runtime support for parsers generated with yapps2. Package: python2.5-django-multilingual Version: 0~r61-6 Architecture: all Maintainer: Matthias Urlichs Installed-Size: 324 Depends: python2.5-django Priority: extra Section: python Filename: pool/main/p/python2.5-django-multilingual/python2.5-django-multilingual_0~r61-6_all.deb Size: 33378 SHA256: 81bd85591a70c2a99ed851fd497f3ba94f8d8da0ce8c213ee835038fdf15cdd9 SHA1: 5461bbb4630796f4a03bbb0afaef2435f43cdfee MD5sum: 14ddda85006b3235551b003798835692 Description: A multilingual extension for Django This module adds transparent translatable table columns to Django. Package: python3-amqp Source: python-amqp Version: 1.4.5+git1-721a753db-3 Architecture: all Maintainer: Debian Python Modules Team Installed-Size: 190 Depends: python3:any (>= 3.3.2-2~) Suggests: python-amqp-doc Homepage: https://github.com/celery/py-amqp Priority: extra Section: python Filename: pool/main/p/python-amqp/python3-amqp_1.4.5+git1-721a753db-3_all.deb Size: 40816 SHA256: d0af22a7995300b9535964d3e7dd258ccb43263287dfa131d152625b9faf9b79 SHA1: b62f9d08b23ceaed0061945f86b97162670a5554 MD5sum: 2c795eb136465e45c034e0a2073588b7 Description: Low-level AMQP client (Python3 version) This is a fork of amqplib which was originally written by Barry Pederson. It is maintained by the Celery project, and used by kombu as a pure Python alternative when librabbitmq is not available. . This library should be API compatible with librabbitmq. Differences from amqplib are: * Supports draining events from multiple channels (Connection.drain_events). * Support for timeouts. * Channels are restored after channel error, instead of having to close the connection. * Support for heartbeats. * Supports RabbitMQ extensions: - Consumer Cancel Notifications. - Publisher confirms. - Exchange-to-exchange bindings: exchange_bind / exchange_unbind. * Support for basic_return. * Uses AMQP 0-9-1 instead of 0-8. * Exposes the underlying socket as Connection.sock. * Adds Channel.no_ack_consumers to keep track of consumer tags that set the no_ack flag. * Slightly better at error recovery. . This package contains the Python 3 version of the library. Package: python3-anyio Source: anyio Version: 0.0.post50-1 Architecture: all Maintainer: Matthias Urlichs Installed-Size: 113 Depends: python3-async-generator, python3:any (>= 3.3.2-2~) Priority: optional Section: python Filename: pool/main/a/anyio/python3-anyio_0.0.post50-1_all.deb Size: 18306 SHA256: d5a8bab8c14835e5796b0a79cd65d66a5bb099ac40e9f339d1ad9604d58f0349 SHA1: 7321e70b27566b8584e1cb90fa76c1bc09793913 MD5sum: 0038e58f277be1122f55044ac419ac3d Description: High level compatibility layer for multiple asynchronous eve AnyIO is a asynchronous compatibility API that allows applications and libraries written against it to run unmodified on asyncio, curio and trio. . It bridges the following functionality: . * Task groups * Cancellation * Threads * Signal handling * Asynchronous file I/O * Synchronization primitives (locks, conditions, events, semaphores, queues) * High level networking (TCP, UDP and UNIX sockets) Package: python3-async-generator Source: async-generator Version: 1.9+dev2-1 Architecture: all Maintainer: Matthias Urlichs Installed-Size: 89 Depends: python3:any (>= 3.3.2-2~) Homepage: https://github.com/python-trio/async_generator Priority: optional Section: python Filename: pool/main/a/async-generator/python3-async-generator_1.9+dev2-1_all.deb Size: 17846 SHA256: aa47597108d9cd582116cbcbe0dc25667746b4090dbefd7bf291efd459ab4dd4 SHA1: a5fee197502228dee068960a75df7d584f28f365 MD5sum: 40f0cf6fb89c29020c77ae3173705a3c Description: Async generators and context managers for Python 3.5+ .. image:: https://img.shields.io/badge/chat-join%20now-blue.svg :target: https://gitter.im/python-trio/general :alt: Join chatroom . .. image:: https://img.shields.io/badge/docs-read%20now-blue.svg :target: https://async-generator.readthedocs.io/en/latest/?badge=latest :alt: Documentation Status . .. image:: https://travis-ci.org/python-trio/async_generator.svg?branch=master :target: https://travis-ci.org/python-trio/async_generator :alt: Automated test status . .. image:: https://ci.appveyor.com/api/projects/status/af4eyed8o8tc3t0r/branch/master?svg=true :target: https://ci.appveyor.com/project/python-trio/trio/history :alt: Automated test status (Windows) . .. image:: https://codecov.io/gh/python-trio/async_generator/branch/master/graph/badge.svg :target: https://codecov.io/gh/python-trio/async_generator :alt: Test coverage Package: python3-barcode Source: python-barcode Version: 0.9.0-3 Architecture: all Maintainer: Matthias Urlichs Installed-Size: 399 Depends: python3:any (>= 3.3.2-2~) Homepage: https://github.com/WhyNotHugo/python-barcode Priority: optional Section: python Filename: pool/main/p/python-barcode/python3-barcode_0.9.0-3_all.deb Size: 172344 SHA256: fb5d13c11f1a234dc23c3442a1767dc014e4e5cd49abe1627f0440999d7313ab SHA1: 2a017010aa5184156abbe93637acb71dd86a5dbd MD5sum: ca71ea293e6c8fba4c9741a0c5f43986 Description: Create standard barcodes with Python This library provides a simple way to create barcodes using only the Python standard lib. The barcodes are created as SVG objects. Package: python3-blinker Source: blinker Version: 1.4~git1-746b6777a-3 Architecture: all Maintainer: Debian Python Modules Team Installed-Size: 39 Depends: python3:any (>= 3.3.2-2~) Homepage: http://pythonhosted.org/blinker/ Priority: optional Section: python Filename: pool/main/b/blinker/python3-blinker_1.4~git1-746b6777a-3_all.deb Size: 13032 SHA256: d194d6e102e37982a3a081c471a17aa5b47a5c2536f7c4a8e519d7e9d3df96ee SHA1: 4d509919dc5e03c9cf931f420c0f6129d5b82536 MD5sum: 555acb9ead960ac8a5f5a576d9f86915 Description: Fast, simple object-to-object and broadcast signaling library Blinker provides a fast dispatching system that allows any number of interested parties to subscribe to events, or "signals". . Signal receivers can subscribe to specific senders or receive signals sent by any sender. Package: python3-dogpile.cache Source: python-dogpile.cache Version: 0.5.4-1 Architecture: all Maintainer: PKG OpenStack Installed-Size: 113 Pre-Depends: dpkg (>= 1.15.6~) Depends: python3:any (>= 3.3.2-2~), python3-dogpile.core Homepage: http://bitbucket.org/zzzeek/dogpile.cache Priority: optional Section: python Filename: pool/main/p/python-dogpile.cache/python3-dogpile.cache_0.5.4-1_all.deb Size: 28070 SHA256: 616af4bf56c47a90ef8d8637d410f1dde42f48658adfcc5795961114ce819d13 SHA1: 600bd6d36cb7d6b37f3a220a03b7885ccfd0da24 MD5sum: 1488c2d5c4ac1a663b2fdff92a09da20 Description: caching front-end based on the Dogpile lock A caching API built around the concept of a "dogpile lock", which allows continued access to an expiring data value while a single thread generates a new value. . dogpile.cache builds on the dogpile.core locking system (see http://pypi.python.org/pypi/dogpile.core), which implements the idea of "allow one creator to write while others read" in the abstract. Overall, dogpile.cache is intended as a replacement to the Beaker (see http://beaker.groovie.org) caching system, the internals of which are written by the same author. All the ideas of Beaker which "work" are re-implemented in dogpile.cache in a more efficient and succinct manner, and all the cruft (Beaker's internals were first written in 2005) relegated to the trash heap. Package: python3-dogpile.core Source: python-dogpile.core Version: 0.4.1+git1-e9011d849-2 Architecture: all Maintainer: PKG OpenStack Installed-Size: 25 Pre-Depends: dpkg (>= 1.15.6~) Depends: python3:any (>= 3.3.2-2~) Homepage: http://bitbucket.org/zzzeek/dogpile.core Priority: optional Section: python Filename: pool/main/p/python-dogpile.core/python3-dogpile.core_0.4.1+git1-e9011d849-2_all.deb Size: 9316 SHA256: 8f00cfc2deb2cf804e1271bb234daa29b007b83bd2a6965762d6862ca9fb0376 SHA1: e11de02af65f820fbd4b09ca79479ef5f4727e48 MD5sum: ecaf5ebca81b23f88f2cfc7e8d2bf62a Description: dogpile lock, typically used as a component of a larger caching solution Python dogpile.core lock allows a single thread to generate an expensive resource while other threads use the old value, until the new"value is ready. . Dogpile is basically the locking code extracted from the Beaker package, for simple and generic usage. Package: python3-flask-login Source: flask-login Version: 0.2.11+git1-ae162d3d9-1 Architecture: all Maintainer: Tonnerre LOMBARD Installed-Size: 129 Homepage: https://flask-login.readthedocs.org/ Priority: optional Section: python Filename: pool/main/f/flask-login/python3-flask-login_0.2.11+git1-ae162d3d9-1_all.deb Size: 21798 SHA256: 19ba00104ade320522cf02ab665c3ad78475bb2ae4cdc1de59277de1ffc07f3c SHA1: 9df48d2b9c17b1b1143d96e9fe895295415b0c11 MD5sum: 19989f5e6cce25942b50d8e147c57de4 Description: user session management for Flask Flask-Login provides user session management for Flask. It handles the common tasks of logging in, logging out, and remembering your users' sessions over extended periods of time. . Flask-Login is not bound to any particular database system or permissions model. The only requirement is that your user objects implement a few methods, and that you provide a callback to the extension capable of loading users from their ID. Package: python3-flask-migrate Source: flask-migrate Version: 1.2.0+git1-8e8a4d018-3 Architecture: all Maintainer: Debian Python Modules Team Installed-Size: 14 Depends: python3:any (>= 3.3.2-2~), python3-flask-sqlalchemy, python3-flask (>= 0.9), python3-alembic, python3-flask-script, alembic (>= 0.6) Homepage: https://pypi.python.org/pypi/Flask-Migrate Priority: optional Section: python Filename: pool/main/f/flask-migrate/python3-flask-migrate_1.2.0+git1-8e8a4d018-3_all.deb Size: 6374 SHA256: 720f9973203485699ab64c5ec220ed7350e44f0f2121f03b99bcbc90798cdb2b SHA1: 538aca55123e5bf568e0266602353f3cff5fcfea MD5sum: b1bec033a4880d6bb34249d9292c853f Description: SQLAlchemy database migrations for Flask applications using Alembic Flask-Migrate is an extension that handles SQLAlchemy database migrations for Flask applications using Alembic. The database operations are provided as command line arguments for Flask-Script. Package: python3-flask-principal Source: flask-principal Version: 0.4.0+git1-81ee6b7d6-1 Architecture: all Maintainer: Tonnerre LOMBARD Installed-Size: 19 Depends: python3:any (>= 3.3.2-2~), python3-flask Homepage: https://flask-principal.readthedocs.org/ Priority: optional Section: python Filename: pool/main/f/flask-principal/python3-flask-principal_0.4.0+git1-81ee6b7d6-1_all.deb Size: 8222 SHA256: cdf7950efed7c3e057a5fdacef5e92c365bd7eacb50891dcdf0401d7f476ca5b SHA1: 6f658110970a8a4bed6084114564e17ca214b32d MD5sum: 8fe285d23efd2bc068d2671a52d11fcd Description: identity management for Flask Flask-Principal provides a very loose framework to tie in providers of two types of service, often located in different parts of a web application: . - Authentication providers - User information providers . For example, an authentication provider may be oauth, using Flask-OAuth and the user information may be stored in a relational database. Looseness of the framework is provided by using signals as the interface. . This is the Python 3 version of the package. Package: python3-flask-wtf Source: flask-wtf Version: 0.9.5+git1-11e7e8e27-2 Architecture: all Maintainer: Debian Python Modules Team Installed-Size: 29 Depends: python3-wtforms, python3:any (>= 3.3.2-2~), python3-flask Recommends: libjs-jquery Suggests: python3-flask-babel Homepage: http://packages.python.org/Flask-WTF/ Priority: optional Section: python Filename: pool/main/f/flask-wtf/python3-flask-wtf_0.9.5+git1-11e7e8e27-2_all.deb Size: 10890 SHA256: bd1c827b0e57f005cb7bee5137d8ccd091180c5b5a12fe642dfa39249564401f SHA1: ddc48fb08bbb3a3e3e5ecaa6d757dcfb4d2c1bf5 MD5sum: dbf66e49ef81cce4f66de2f10bc03ed4 Description: Simple integration of Flask and WTForms Flask-WTF is an extension for Flask, providing a simple integration of WTForms. It includes optional CSRF handling and Recaptcha support. Package: python3-formalchemy Source: python-formalchemy Version: 1.5.3-1 Architecture: all Maintainer: Shell Xu Installed-Size: 636 Depends: python3-markupsafe, python3-webob, python3-sqlalchemy (>= 0.9~), python3-sqlalchemy (<< 0.10), python3-tempita, python3:any (>= 3.3.2-2~), python3-webhelpers2 Suggests: python3-bs4 Homepage: http://docs.formalchemy.org/ Priority: optional Section: python Filename: pool/main/p/python-formalchemy/python3-formalchemy_1.5.3-1_all.deb Size: 93884 SHA256: a0d4a8bd9ea3e2a7b2288132f9d8193945dabe52d34060cfd0edaf9b2e2563c6 SHA1: 89243bd41830a93f58c42494f6cae2fd8bd626e0 MD5sum: 7b1e02159bd86d31030b1600e439e252 Description: HTML input form fields from your SQLAlchemy mapped classes FormAlchemy greatly speeds development with SQLAlchemy mapped classes (models) in a HTML forms environment. . FormAlchemy eliminates boilerplate by autogenerating HTML input fields from a given model. FormAlchemy will try to figure out what kind of HTML code should be returned by introspecting the model's properties and generate ready-to-use HTML code that will fit the developer's application. . Of course, FormAlchemy can't figure out everything, i.e, the developer might want to display only a few columns from the given model. Thus, FormAlchemy is also highly customizable. Package: python3-jinja2 Source: jinja2 Version: 2.8~git1-4d1674682-1 Architecture: all Maintainer: Piotr Ożarowski Installed-Size: 974 Depends: python3-markupsafe, python3:any (>= 3.3.2-2~) Recommends: python3-pkg-resources Suggests: python-jinja2-doc Homepage: http://jinja.pocoo.org/2/ Priority: optional Section: python Filename: pool/main/j/jinja2/python3-jinja2_2.8~git1-4d1674682-1_all.deb Size: 168966 SHA256: 1b673f45ef54bfcc24b78111b448dc690dbab69e4eb421e8eff430f3d4edba0e SHA1: 6a20a0956e4fc87632ff830e9e80b555a58365b3 MD5sum: 7a93b0c0f0eac339ab74169625693bcc Description: small but fast and easy to use stand-alone template engine Jinja2 is a template engine written in pure Python. It provides a Django inspired non-XML syntax but supports inline expressions and an optional sandboxed environment. . The key-features are: * Configurable syntax. If you are generating LaTeX or other formats with Jinja2 you can change the delimiters to something that integrates better into the LaTeX markup. * Fast. While performance is not the primarily target of Jinja2 it’s surprisingly fast. The overhead compared to regular Python code was reduced to the very minimum. * Easy to debug. Jinja2 integrates directly into the Python traceback system which allows you to debug Jinja2 templates with regular Python debugging helpers. * Secure. It’s possible to evaluate untrusted template code if the optional sandbox is enabled. This allows Jinja2 to be used as templating language for applications where users may modify the template design. Package: python3-moat-gpio Source: moat-gpio Version: 0.2.1-3 Architecture: all Maintainer: Matthias Urlichs Installed-Size: 59 Depends: python3-trio-amqp, python3-trio-click, python3-trio-gpio, python3:any (>= 3.3.2-2~) Recommends: wiringpi Homepage: https://github.com/M-o-a-T/ Priority: optional Section: python Filename: pool/main/m/moat-gpio/python3-moat-gpio_0.2.1-3_all.deb Size: 9712 SHA256: 45d9a58b96aeda87ac71325d3c06670185a856012daf8bca7092d68ad46723be SHA1: 23ec8a41d3618d109923daad09bb1ac281f16521 MD5sum: 26a6b3abfca2b2112a2ccc814aabeb9c Description: Control GPIO lines via AMQP MoaT-GPIO ========= . This program controls GPIO lines via AMQP. Currently it supports basic Linux GPIO features, i.e. input, output, and line monitoring. . Home page: Package: python3-outcome Source: outcome Version: 0.1.0-2 Architecture: all Maintainer: Matthias Urlichs Installed-Size: 27 Depends: python3-attr, python3:any (>= 3.3.2-2~) Homepage: https://github.com/python-trio/outcome Priority: optional Section: python Filename: pool/main/o/outcome/python3-outcome_0.1.0-2_all.deb Size: 4868 SHA256: 24e79e8d6a2de6ff1e98d1f7072acf9529a4729bee9b37831274f2dfa468cc12 SHA1: f20a63420f678c48e533bae34bef8af051479fb4 MD5sum: 1aad7f173b3578c6d64c4e5cd436fa2d Description: Capture the outcome of Python function calls. .. image:: https://img.shields.io/badge/chat-join%20now-blue.svg :target: https://gitter.im/python-trio/general :alt: Join chatroom . .. image:: https://img.shields.io/badge/docs-read%20now-blue.svg :target: https://outcome.readthedocs.io/en/latest/?badge=latest :alt: Documentation Status . .. image:: https://travis-ci.org/python-trio/trio.svg?branch=master :target: https://travis-ci.org/python-trio/outcome :alt: Automated test status (Linux and MacOS) . .. image:: https://ci.appveyor.com/api/projects/status/c54uu4rxlgs2usmj/branch/master?svg=true :target: https://ci.appveyor.com/project/RazerM/outcome/history :alt: Automated test status (Windows) . .. image:: https://codecov.io/gh/python-trio/trio/branch/master/graph/badge.svg :target: https://codecov.io/gh/python-trio/outcome :alt: Test coverage Package: python3-passlib Source: python-passlib Version: 1.6.2-2 Architecture: all Maintainer: Julien Danjou Installed-Size: 1296 Depends: python3:any (>= 3.3.2-2~) Homepage: http://code.google.com/p/passlib/ Priority: extra Section: python Filename: pool/main/p/python-passlib/python3-passlib_1.6.2-2_all.deb Size: 236442 SHA256: ea3e5cd6e9f1b7f78c8200a7c6b192b94bb2617f8fe936bd327a7ca90a78530b SHA1: 3b1b0fcfb1f09394c6156c01963a703da2c85001 MD5sum: 75d4b012f8a78d6cc2cae4112047cedc Description: comprehensive password hashing framework Password hashing library for Python 3, which provides cross-platform implementations of over 20 password hashing algorithms, as well as a framework for managing existing password hashes. It's designed to be useful for a wide range of tasks; from verifying a hash found in /etc/shadow, to providing full-strength password hashing for multi-user applications. Package: python3-pyst Source: python-pyst Version: 0.6.99+git1-7f3e19c6d-1 Architecture: all Maintainer: Debian VoIP Team Installed-Size: 84 Depends: python3:any (>= 3.3.2-2~) Enhances: asterisk Priority: optional Section: python Filename: pool/main/p/python-pyst/python3-pyst_0.6.99+git1-7f3e19c6d-1_all.deb Size: 23840 SHA256: cafdf6804485b8aed211d1c27c71f29f1862b7954339555ebb0b6953c03a1740 SHA1: e8a6e999d8292c8d301cabb578b8826af0ec263a MD5sum: 45dd5fccacb6d2b3a464f2243061d85f Description: Python module for interacting with the Asterisk PBX Pyst consists of a set of interfaces and libraries to allow programming and control of Asterisk from Python. The library currently supports: . * AGI (Asterisk Gateway Interface) * AMI (Asterisk Manager Interface) * parsing of Asterisk configuration files . It also provides a helper module to display Python AGI backtraces in the Asterisk console. Package: python3-pytest-trio Source: pytest-trio Version: 0.4.2-4 Architecture: all Maintainer: Matthias Urlichs Installed-Size: 84 Depends: python3-async-generator, python3-pytest (>= 3.3), python3-trio, python3:any (>= 3.3.2-2~) Homepage: https://github.com/python-trio/pytest-trio Priority: optional Section: python Filename: pool/main/p/pytest-trio/python3-pytest-trio_0.4.2-4_all.deb Size: 15218 SHA256: 58cc6f82e89113df1cd978e917aa7f00450307c58e7e4f34fdbfcf6c7d628d4c SHA1: 76d3a501448f1ab14db1da4a5529604366a772fc MD5sum: fab1987299d8347751b4b04b5ff41b16 Description: Pytest plugin for trio This plugin affords the "@pytest.mark.trio" decorator which you can use to execute async testcases in a Trio context. . Using async generators as fixtures is also supported. Package: python3-python-barcode Source: python-barcode Version: 0.9.0-1 Architecture: all Maintainer: Matthias Urlichs Installed-Size: 399 Depends: python3:any (>= 3.3.2-2~) Homepage: https://github.com/WhyNotHugo/python-barcode Priority: optional Section: python Filename: pool/main/p/python-barcode/python3-python-barcode_0.9.0-1_all.deb Size: 172662 SHA256: cf5f6e0c17d416cb9113c394536254896558db5707452302d8e6a44bb0dcf510 SHA1: d8c7affb2828accffcea4db4b9b3c6ec61fd71d0 MD5sum: bc2643c13c3a53c0a7cc21d4ba83a2f8 Description: Create standard barcodes with Python. No external modules ne python-barcode ============== . .. image:: example-ean13.png :target: https://github.com/WhyNotHugo/python-barcode :alt: python-barcode . This library provides a simple way to create barcodes using only the Python standard lib. The barcodes are created as SVG objects. . Please report any bugs at https://github.com/WhyNotHugo/python-barcode/issues . . Requirements ------------ . - Setuptools/distribute for installation. - Python 3.5 or above - Program to open SVG objects (your browser should do it) - Optional: PIL to render barcodes as images (PNG, JPG, ...) Package: python3-trio Source: trio Version: 0.7.0-1 Architecture: all Maintainer: Matthias Urlichs Installed-Size: 879 Depends: python3-async-generator, python3-attr, python3-idna, python3-outcome, python3-sniffio, python3-sortedcontainers, python3:any (>= 3.3.2-2~), python3-contextvars Homepage: https://github.com/python-trio/trio Priority: optional Section: python Filename: pool/main/t/trio/python3-trio_0.7.0-1_all.deb Size: 172948 SHA256: 5348942cbbb557bfc11bbdf23b9f43ce2c7b60c15d8e5b9d93ebb7ca11a5f0ec SHA1: 4e505fd70ac882363eea9689ed1177180b5edaa4 MD5sum: ca4045ab739c41fa7fdb0b799e28fcc5 Description: Async/await-native I/O library for humans and snake people The Trio project's goal is to produce a production-quality, permissively licensed async/await-native I/O library for Python. Like all async libraries, its main purpose is to help you write programs that do multiple things at the same time with parallelized I/O. A web spider that wants to fetch lots of pages in parallel, a web server that needs to juggle lots of downloads and websocket connections at the same time, a process supervisor monitoring multiple subprocesses... that sort of thing. Compared to other libraries, Trio attempts to distinguish itself with an obsessive focus on usability and correctness. Concurrency is complicated; we try to make it easy to get things right. Package: python3-trio-aiohttp Source: trio-aiohttp Version: 0.2.3-1 Architecture: all Maintainer: Matthias Urlichs Installed-Size: 26 Depends: python3-aiohttp, python3-trio-asyncio, python3:any (>= 3.3.2-2~) Homepage: https://github.com/smurfix/trio-aiohttp Priority: optional Section: python Filename: pool/main/t/trio-aiohttp/python3-trio-aiohttp_0.2.3-1_all.deb Size: 4736 SHA256: 82ceec202687ec1cad3e37b2852d9998aabfad371749f796638e7a11fa5c54f6 SHA1: 52aa9d6e61b1805cf7387f9751b8fc0d40e113e3 MD5sum: 6a133200c84033d9b0e6db377102f94a Description: Helpers for running aiohttp under Trio trio-aiohttp ============ . Welcome to `trio-aiohttp `__! . This package contains helpers for running aiohttp under Trio. Specifically, this code allows you to run a basic Trio-based web server, including WobSocket supprt. . License: GPLv3 as published by the Free Software Foundation, or (at your option) any later version Package: python3-trio-amqp Source: trio-amqp Version: 0.2.12-1 Architecture: all Maintainer: Matthias Urlichs Installed-Size: 124 Depends: python3-trio (>= 0.4), python3:any (>= 3.3.2-2~), python3 (>> 3.5) Priority: optional Section: python Filename: pool/main/t/trio-amqp/python3-trio-amqp_0.2.12-1_all.deb Size: 21884 SHA256: bb67e471a93d409f89625cfcbc0ef215cf6d2a4f371fdac23d442ba6a8a8fccd SHA1: b3988b527478bb7833bc412fc4d5eb9494acae83 MD5sum: 4b8b4524a13f8470f1d7105a42bbebce Description: AMQP implementation using trio The trio_amqp library is a pure-Python implementation of the AMQP 0.9.1 protocol. . Built on top of Trio, it provides an API based on coroutines, making it easy to write highly concurrent applications. Package: python3-trio-asyncio Source: trio-asyncio Version: 0.8.0-2 Architecture: all Maintainer: Matthias Urlichs Installed-Size: 93 Depends: python3-async-generator, python3-contextvars, python3-outcome, python3-trio (>= 0.5.0), python3:any (>= 3.3.2-2~) Homepage: https://github.com/smurfix/trio-asyncio Priority: optional Section: python Filename: pool/main/t/trio-asyncio/python3-trio-asyncio_0.8.0-2_all.deb Size: 19336 SHA256: e1a59d4e03d870f2417018d3fa3a793b1f7c183c365c5a1417e97c6b9b96123e SHA1: cf048e37cf0bf310f7aae72c6a8a16491bdc5b75 MD5sum: a78016dff8deaa67c347daf586a474c6 Description: Re-implementation of the asyncio mainloop on top of Trio trio_asyncio allows you to call asyncio code from within Trio, or vice versa. . While there's a compatibility mode which allows you to use a standard asyncio mainloop, trio-asyncio works best when used with a Trio mainloop. Examples how to convert one to the other are included in the documentation. Package: python3-trio-click Source: trio-click Version: 1:7.0~dev4-1 Architecture: all Maintainer: Matthias Urlichs Installed-Size: 277 Depends: python3-trio, python3:any (>= 3.3.2-2~) Homepage: http://github.com/pallets/click Priority: optional Section: python Filename: pool/main/t/trio-click/python3-trio-click_7.0~dev4-1_all.deb Size: 59360 SHA256: 2321b4c1f65c45aa16424abe1c5bd3726a011c3cee5e4a033093b95b1f25fc97 SHA1: 3f2a02e11d41373accd5841751258d46bc4ec811 MD5sum: 1d9b9bcd03746283c4d1b5e0be00dd72 Description: A simple wrapper around optparse for powerful command line u Package: python3-trio-gpio Source: trio-gpio Version: 0.2.4-1 Architecture: all Maintainer: Matthias Urlichs Installed-Size: 38 Depends: python3-async-generator, python3-cffi-backend-api-min (<= 9729), python3-cffi-backend-api-max (>= 9729), python3-trio, python3-trio-amqp, python3-trio-click, python3-yaml, python3:any (>= 3.3.2-2~), libgpiod1, python3-cffi Homepage: https://github.com/M-o-a-T/trio-gpio Priority: optional Section: python Filename: pool/main/t/trio-gpio/python3-trio-gpio_0.2.4-1_all.deb Size: 6858 SHA256: a4dc0f7a4f7544edd839d118e2b088aea64cf7ce2e1faaa3d515f26e78e8b674 SHA1: 142f3348cc0a8bc70d027901c7298e030f881efb MD5sum: 8791d471239422b5a82592229fe13ee5 Description: GPIO access via Trio and libgpiod Trio-GPIO allows easy access to the GPIO pins on your Raspberry Pi or similar embedded computer. . It is based on libgpiod and its CFFI adapter by Steven P. Goldsmith , as downloaded from `https://github.com/sgjava/userspaceio.git`__. Package: python3-trio-qbroker Source: trio-qbroker Version: 0.50.0-1 Architecture: all Maintainer: Matthias Urlichs Installed-Size: 118 Depends: python3-trio-amqp (>> 0.2.1), python3-tz, python3-yaml, python3:any (>= 3.5~) Priority: optional Section: python Filename: pool/main/t/trio-qbroker/python3-trio-qbroker_0.50.0-1_all.deb Size: 26404 SHA256: 08f0e9b612ddb51bfb9180f1a6571da95b42ae6008fa378d0adea3e05a3bc833 SHA1: 746f632849ff0c5af91e49a57a08f3ef0213a026 MD5sum: 4037139c4082982a3efcf746609126d8 Description: Quick Broker. QBroker is a minimal wrapper for asynchronous, debuggable RPC via AMQP. . QBroker is written in Python. If you know JSON and AMQP, writing a server or client in a different language is reasonably straightforward. . QBroker uses Trio. Use trio-asyncio if you need to call it from asyncio-based code. Package: python3-werkzeug Source: python-werkzeug Version: 0.10~git3-8f311d277-2 Architecture: all Maintainer: Noah Slater Installed-Size: 1036 Depends: python3:any (>= 3.3.2-2~), libjs-jquery Recommends: python3-simplejson | python3, python3-openssl, python3-pyinotify Suggests: ipython3, python3-pkg-resources, python3-lxml, python-werkzeug-doc Homepage: http://werkzeug.pocoo.org/ Priority: optional Section: python Filename: pool/main/p/python-werkzeug/python3-werkzeug_0.10~git3-8f311d277-2_all.deb Size: 222686 SHA256: b2dbbb214bd1c3d02e8457c631f93ffde3453485df9454f6f013cf07c42291ba SHA1: 9f4dbb937964352ea43ad8b9653ddc3ade199554 MD5sum: 0cf07bb5bc038565ff3795c6fea2148f Description: collection of utilities for WSGI applications The Web Server Gateway Interface (WSGI) is a standard interface between web server software and web applications written in Python. . Werkzeug is a lightweight library for interfacing with WSGI. It features request and response objects, an interactive debugging system and a powerful URI dispatcher. Combine with your choice of third party libraries and middleware to easily create a custom application framework. Package: python3-wtforms Source: wtforms Version: 2.0-2 Architecture: all Maintainer: Debian Python Modules Team Installed-Size: 360 Depends: python3:any (>= 3.3.2-2~) Recommends: python3-dateutil, libjs-jquery Suggests: python3-sqlalchemy (>= 0.5), python3-django Homepage: http://wtforms.simplecodes.com/ Priority: optional Section: python Filename: pool/main/w/wtforms/python3-wtforms_2.0-2_all.deb Size: 55624 SHA256: b95c8121d701d4e9ca56226386f83642402f26e056946a45742b80f5679dfc24 SHA1: 3f1c923788d75601095011b85f513a944d685631 MD5sum: 2571d3f5263b4ad8d88a2d368e3cee74 Description: flexible forms validation and rendering library for Python WTForms is a HTML form field generator which allows full customization with templates, using the template engine of your choice. It also allows to create forms based on ORM models from Django, SqlAlchemy and the Google Appengine. Package: python3-yapps Source: yapps2 Version: 2.2.1-3 Architecture: all Maintainer: Matthias Urlichs Installed-Size: 79 Depends: python3:any (>= 3.3.2-2~) Priority: optional Section: python Filename: pool/main/y/yapps2/python3-yapps_2.2.1-3_all.deb Size: 18812 SHA256: 3ecc91c60a661f524ebe9aa81d19726434f9a5459059372ccda7619da991dad9 SHA1: d6fa5d9549ecf792595460379b2cdce238c3f824 MD5sum: e2657e6784473dae52030b1e310ef33b Description: Yet Another Python Parser System YAPPS is an easy to use parser generator that is written in Python and generates Python code. There are several parser generator systems already available for Python, but this parser has different goals: Yapps is simple, very easy to use, and produces human-readable parsers. . This package contains the Python3 runtime support for parsers generated with yapps2. Package: sip-tester Version: 4~noris1 Architecture: i386 Maintainer: ARAKI Yasuhiro Installed-Size: 572 Depends: libc6 (>= 2.4), libgcc1 (>= 1:4.1.1), libncurses5 (>= 5.6+20071006-3), libpcap0.8 (>= 0.9.3-1), libssl0.9.8 (>= 0.9.8f-5), libstdc++6 (>= 4.1.1) Priority: optional Section: comm Filename: pool/main/s/sip-tester/sip-tester_4~noris1_i386.deb Size: 173280 SHA256: e6824bdd60488bd02fd308ab3255eddbe983a70c3fa338d2adca8f201e392dfd SHA1: 64dcaa162ea1ff7b455cc2e1f9ea0cc5e479393b MD5sum: 6e62788fbf5e792ed0dc09e5ce2d4e85 Description: a performance testing tool for the SIP protocol sip-tester is a test tool and traffic generator for the SIP protocol. It can be used to test SIP equipment like SIP proxies, SIP media servers, etc. and to emulate user agents calling a SIP system. . Its features are: * a few basic SipStone user agent scenarios included * custom XML scenario files even for complex call flows * comprehensive set of real-time statistics * TCP and UDP transport * dynamically adjustable call rates - send RTP traffic . This software is distributed as SIPp by its authors. . SIP is the Session Initiation Protocol, a standard signalling protocol for initiating, modifying, and terminating Internet conferencing, telephony (VoIP - Voice over IP), video, and instant messaging. Package: smurf-base Version: 6.0-4 Architecture: all Maintainer: Matthias Urlichs Installed-Size: 44 Depends: debian-archive-keyring, vim, less, ssh, rcs, hdparm, iproute, traceroute, rcconf, screen, ntp, ntpdate, lsof, tcpdump, netcat, strace, binutils, lynx-ssl | lynx, links-ssl | links, smartmontools, apt-file, wget, apt (>= 0.6.46.4), telnet, tree, locate, lshw, mdadm, lvm2 Replaces: ntp, ntp-refclock (<= 1:4.2.0a+stable-9), ntp-server, ntp-simple (<= 1:4.2.0a+stable-9), ntpdate Priority: required Section: smurf/base Filename: pool/main/s/smurf-base/smurf-base_6.0-4_all.deb Size: 6046 SHA256: cc27c57d6dfafbf236a8e28984704e946a7868b2896c8fb303620a8fe5602ca4 SHA1: c74ffd7f85c20560b80474f4e3e1f963ac93e703 MD5sum: 6e214cad1d30ad170aabe637e093e1a4 Description: Smurf's base installation This is a meta package which depends on some basics, such as ssh and vim. It also changes some defaults to fit my needs. Package: sourcemgr Version: 1.399 Architecture: i386 Maintainer: Matthias Urlichs Installed-Size: 128 Depends: devscripts (>> 2.7.92.1), shlock, dput, rcs, cvs, lintian, dh-make, libshlock-perl, xbase-clients, python (<< 3), python (>= 2.5) Recommends: bitkeeper (>> 3), bitkeeper (<< 3.0.4) Priority: optional Section: devel Filename: pool/main/s/sourcemgr/sourcemgr_1.399_i386.deb Size: 20014 SHA256: bc36ce10827494f7d452510401902abe6783dc6c3b01f8601dd3d3b4756d91b4 SHA1: d4a4b47092f5e987a3c79db9cae81dfd8869ce6c MD5sum: 68a902844ad9c71352af6d3523827a0b Description: Source management speed-up commands Helper commands to handle Bitkeeper or PRCS archives. Included are commands to debianize source archives and auto-build RPMs and DEBs. . Note: I have switched to Debian. Therefore, the RPM support is likely to be somewhat out of date. Package: yapps2 Version: 2.2.1-3 Architecture: all Maintainer: Matthias Urlichs Installed-Size: 105 Depends: python3:any, python:any (>= 2.2~), python3-yapps (= 2.2.1-3), python3-pkg-resources Priority: optional Section: python Filename: pool/main/y/yapps2/yapps2_2.2.1-3_all.deb Size: 44054 SHA256: 2546268067e6ca6111ccbf1de5d5a9f16d8258c316cf89e314c74cc8a8dfbc48 SHA1: 65dddf2aa8e1a6f2e688087e1081b9da175b4806 MD5sum: 037ab6889e8f4004a62f45d5e195c770 Description: Yet Another Python Parser System YAPPS is an easy to use parser generator that is written in Python and generates Python code. There are several parser generator systems already available for Python, but this parser has different goals: Yapps is simple, very easy to use, and produces human-readable parsers. . It is not the fastest or most powerful parser. Yapps is designed to be used when regular expressions are not enough and other parser systems are too much: situations where you might otherwise write your own recursive descent parser. . This package contains several upward-compatible enhancements to the original YAPPS source: . - handles recursive input ("include files") - better error reporting - reads input incrementally